LG Electronics DVD Player DN191H User Manual

DN1F1NH_HA1ULL_ENG  
DVD PLAYER  
OWNER’S MANUAL  
MODEL : DN191H  
Before connecting, operating or adjusting this product,  
please read this instruction booklet carefully and completely.  
For service/  
support Call:  
Toll Free Number  
1-800-243-0000  
© Copyright 2006, LG Electronics U.S.A., Inc.  
 
IMPORTANT SAFETY INSTRUCTIONS  
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND  
THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
CAUTION:  
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or  
fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for  
installation, use, and servicing.  
This product does not contain any parts that can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read these instructions. - All these safety and operating  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the  
product.  
instructions should be read before the product is operated.  
2. Keep these instructions. - The safety, operating and use  
instructions should be retained for future reference.  
11. Only use attachments/accessories specified by the  
manufacturer.  
3. Heed all warnings. - All warnings on the product and in  
the operating instructions should be adhered to.  
4. Follow all instructions.  
-
All operating and use  
instructions should be followed.  
5. Do not use this product near water. – For example: near  
a bath tub, wash bowl, kitchen sink, laundry tub, in a wet  
basement; or near a swimming pool; and other areas  
located near water.  
6. Clean only with dry cloth. – Unplug this product from the  
wall outlet before cleaning. Do not use liquid cleaners.  
12. Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with  
apparatus. When a cart is used, use caution when  
moving the cart/product combination to avoid injury  
from tip-over.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
-
Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the product  
and to protect it from over- heating. The openings should  
never be blocked by placing the product on a bed, sofa,  
rug or other similar surface. This product should not be  
placed in a built-in installation such as a bookcase or rack  
unless proper ventilation is provided or the manufacturer’s  
instructions have been adhered to.  
13. Unplug this product during lightning storms or when  
unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the product has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the product, the product has been  
exposed to rain or moisture, does not operate  
normally, or has been dropped.  
8. Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The wide  
blade or the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
3
 
Contents  
Introduction . . . . . . . . . . . . . . . . . .5-8 Operation . . . . . . . . . . . . . . . . . .16-24  
General Features . . . . . . . . . . . . . . . . . . . . . .16  
Additional Features . . . . . . . . . . . . . . . . . . . .17  
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . .18  
Moving to another GROUP . . . . . . . . . . . . .18  
Viewing another PAGE . . . . . . . . . . . . . . . .18  
Playing an Memory Card . . . . . . . . . . . . . . . .19  
Playing an Audio CD or MP3/WMA file . . . . .20  
Programmed Playback . . . . . . . . . . . . . . . . .20  
Repeat Programmed Tracks . . . . . . . . . . . .20  
Erasing a Track from Program List . . . . . . .20  
Erasing the Complete Program List . . . . . .20  
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .21  
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . .21  
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .21  
Moving to another File . . . . . . . . . . . . . . . .21  
About the  
Symbol Display . . . . . . . . . . . . .5  
Symbol used in this Manual . . . . . . . . . . . . . .5  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5  
Handling Discs . . . . . . . . . . . . . . . . . . . . . . .5  
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . .5  
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . . .5  
Types of Playable Discs . . . . . . . . . . . . . . . . .6  
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .6  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .8  
Remote Control Operation . . . . . . . . . . . . . .8  
Remote Control Battery Installation . . . . . . .8  
Installation and Setup . . . . . . . . .9-15  
Setting up the Player . . . . . . . . . . . . . . . . . . . .9  
DVD Player Connections . . . . . . . . . . . . . . . . .9  
Video and Audio Connections to Your TV . . .9  
Resolution setting . . . . . . . . . . . . . . . . . . . . .9  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
To rotate picture . . . . . . . . . . . . . . . . . . . . .21  
To listen to MP3 music while watching  
picture . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
HDMI connection . . . . . . . . . . . . . . . . . . . .10  
Audio Connection to Optional Equipment . .11  
Playing a DivX Movie file . . . . . . . . . . . . . . . .22  
Controlling Your TV with the Supplied  
Displaying Disc Information on-screen . . . .12  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .12  
General Operation . . . . . . . . . . . . . . . . . . .12  
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .13  
• Menu Language . . . . . . . . . . . . . . . . . . .13  
• Disc Audio / Subtitle / Menu . . . . . . . . . .13  
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . .13  
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . . .13  
• Display Mode . . . . . . . . . . . . . . . . . . . . .13  
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
• Dolby Digital / DTS / MPEG . . . . . . . . . .13  
• Sample Freq. (Frequency) . . . . . . . . . . . .13  
• Dynamic Range Control (DRC) . . . . . . . .13  
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
LOCK (Parental Control) . . . . . . . . . . . . . .14  
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
• Password . . . . . . . . . . . . . . . . . . . . . . . .14  
• Area Code . . . . . . . . . . . . . . . . . . . . . . .14  
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . .15  
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . .15  
• B.L.E. (Black Level Expansion) . . . . . . . .15  
• DivX(R) VOD . . . . . . . . . . . . . . . . . . . . .15  
Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Maintenance and Service . . . . . . . . . . . . . . .24  
Reference . . . . . . . . . . . . . . . . . .25-26  
Language Codes . . . . . . . . . . . . . . . . . . . . . . .25  
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .26  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .26  
4
 
Introduction  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain for future  
reference.  
Notes on Discs  
Handling Discs  
Do not touch the playback side of the disc. Hold the  
disc by the edges so that fingerprints do not get on  
the surface. Never stick paper or tape on the disc.  
This manual provides information on the operation  
and maintenance of your DVD player. Should the unit  
require service, contact an authorized service location.  
About the Symbol Display  
” may appear on your TV display during  
operation and indicates that the function explained in  
this owner’s manual is not available on that specific  
DVD video disc.  
Storing Discs  
After playing, store the disc in its case. Do not expose  
the disc to direct sunlight or sources of heat and never  
leave it in a parked car exposed to direct sunlight.  
Symbol Used in this Manual  
Cleaning Discs  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the center out.  
Note:  
Indicates special notes and operating features.  
Tip:  
Indicates tips and hints for making the task easier.  
A section whose title has one of the following symbols  
is applicable only to the disc represented by the  
symbol.  
ALL  
All discs and file listed below  
DVD-V  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
DVD and finalized DVD R/RW  
DVD-A  
DVD Audio discs  
VCD  
Video CDs  
ACD  
Audio CDs  
MP3  
MP3 files  
WMA  
WMA files  
DivX  
M/C  
DivX files  
Memory Card  
5
 
Types of Playable Discs  
Regional Code  
This unit has a regional code printed on the rear of the  
unit. This unit can play only DVD discs labelled same  
as the rear of the unit or “ALL”.  
DVD  
(8 cm / 12 cm disc)  
DVD audio discs  
(8 cm / 12 cm disc)  
Notes on Regional Codes  
• Most DVD discs have a globe with one or more  
numbers in it clearly visible on the cover. This  
number must match your unit’s regional code or the  
disc cannot play.  
Video CD (VCD/SVCD)  
(8 cm / 12 cm disc)  
Audio CD  
(8 cm / 12 cm disc)  
• If you try to play a DVD with a different regional  
code from your player, the message “Check  
Regional Code” appears on the TV screen.  
In addition, this unit plays Memory Card, DVD R/RW  
and CD-R/RW that contains audio titles, DivX, MP3,  
WMA, and/or JPEG files.  
Notes on Copyrights:  
It is forbidden by law to copy, broadcast, show,  
broadcast via cable, play in public, or rent copyrighted  
material without permission. This product features the  
copy protection function developed by Macrovision.  
Copy protection signals are recorded on some discs.  
When recording and playing the pictures of these  
discs picture noise will appear. This product  
incorporates copyright protection technology that is  
protected by method claims of certain U.S. patents  
and other intellectual property rights owned by  
Macrovision Corporation and other rights owners. Use  
of this copyright protection technology must be  
authorized by Macrovision Corporation, and is  
intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is  
prohibited.  
Notes:  
• Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD R/RW) disc  
itself, some CD-R/RW (or DVD R/RW) discs  
cannot be played on the unit.  
• Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal) since they may result in  
malfunctions.  
• This DVD player requires discs and recordings to  
meet certain technical standards in order to achieve  
optimal playback quality. Pre-recorded DVDs are  
automatically set to these standards. There are  
many different types of recordable disc formats  
(including CD-R containing MP3 or WMA files) and  
these require certain pre-existing conditions (see  
above) to ensure compatible playback.  
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH  
DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED THAT  
THE USER SWITCH THE CONNECTION TO THE  
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE  
QUESTIONS REGARDING OUR TV SET  
Customers should note that permission is  
required in order to download MP3 / WMA files  
and music from the Internet. Our company has  
no right to grant such permission. Permission  
should always be sought from the copyright  
owner.  
COMPATIBILITY WITH THIS MODEL 525p DVD  
PLAYER, PLEASE CONTACT OUR CUSTOMER  
SERVICE CENTER.  
6
 
Front Panel  
a
b c d e f g h  
i
j
k
l
a POWER  
h SKIP (>)  
Go to next chapter or track.  
Switches the unit ON and OFF.  
b
Z (OPEN / CLOSE)  
i Display window  
Opens or closes the disc tray.  
Shows the current status of the unit.  
c RES.  
j Remote Sensor  
You can change the resolution depending on  
Point the remote control here.  
your TV.  
k Disc Tray  
d MEMORY  
Insert a disc here.  
Accesses the menu for memory card.  
l MEMORY CARD Slot  
Insert a memory card.  
e
f
N (PLAY)  
Starts playback.  
(CF, MD, MMC, SD, MS, MS-Pro, xD)  
x (STOP)  
Stops playback.  
g SKIP (.)  
Returns to beginning of current chapter or track or  
go to previous chapter or track.  
7
 
Remote Control  
SCAN (m / M)  
Search backward or forward.  
POWER  
SKIP (. / >)  
Switches DVD Player ON and OFF.  
Go to next chapter or track. Returns  
to beginning of current chapter or  
track or go to previous chapter or  
track.  
OPEN/CLOSE (Z)  
Opens and closes the disc tray.  
0-9 numerical buttons  
Selects numbered items in a menu.  
PAUSE / STEP ( X )  
Pauses playback temporarily/ press  
repeatedly for frame-by-frame  
playback.  
CLEAR  
Removes a track number on the  
Program List or a mark on the  
Marker Search menu.  
N (PLAY)  
Starts playback.  
TV Control Buttons  
POWER: Turns the TV on or off.  
AV: Selects the TV’s source.  
PR/CH +/–: Selects TV’s channel.  
VOL +/–: Adjusts TV’s volume.  
STOP (x)  
Stops playback.  
AUDIO  
Selects an audio language or an  
audio channel.  
SUBTITLE  
Selects a subtitle language.  
ANGLE  
Selects a DVD camera angle, if  
available.  
SETUP  
Accesses or removes the Setup  
menu.  
DVD MENU  
Accesses menu on a DVD disc.  
MARKER  
Marks any point during playback.  
TITLE  
Displays title menu, if available.  
SEARCH  
Displays MARKER SEARCH menu.  
b / B / v / V (left/right/up/down)  
Selects an item in the menu.  
PROGRAM  
Enter to program edit mode.  
DISPLAY  
Accesses On-Screen Display.  
ZOOM  
Enlarges video image.  
RETURN (O)  
Displays the video CD with PBC.  
REPEAT  
Repeat chapter, track, title, all.  
A-B  
Repeat sequence from point A to  
point B.  
RANDOM  
Plays tracks in random order.  
RESOLUTION  
You can change the resolution  
depending on your TV.  
Remote Control Operation  
Remote Control Battery installation  
Point the remote control at the remote sensor and  
press the buttons.  
Detach the battery cover on the rear of the  
remote control, and insert two batteries  
(size AAA) with 3 and # aligned correctly.  
Caution:  
Do not mix old and new batteries and never mix  
different types of batteries such as standard, alkaline,  
etc.  
8
 
Installation and Setup  
Component Video – Connect the COMPONENT  
VIDEO OUT/(480p/720p/1080i) jacks on the DVD  
Player to the corresponding in jacks on the TV  
using an Y Pb Pr cable (C).  
Setting up the Player  
The picture and sound of a nearby TV, VCR, or radio  
may be distorted during playback. If this occurs,  
position the player away from the TV, VCR, or radio,  
or turn off the unit after removing the disc.  
Progressive Scan  
• If your television is a high-definition or “digital  
ready” television, you may take advantage of  
the unit’s progressive scan output for the  
highest video resolution possible.  
DVD Player Connections  
Depending on your TV and other equipment there are  
various ways you can connect the player. Please refer  
to the manuals of your TV, stereo system or other  
devices as necessary for additional connection  
information.  
• Progressive scan does not work with the  
analog video connections (yellow VIDEO OUT  
jack and S-VIDEO OUT jack).  
• The 720p and 480p resolutions are the  
progressive scan applied resolution.  
Resolution setting  
1. Before you set the resolution, this unit must be in  
stop mode. Press STOP to stop playback.  
2. Press RESOLUTION once. The current resolution  
setting will be appears in the display window.  
3. Press RESOLUTION repeatedly to change the  
resolution you want.  
The available resolution according to the connections  
are as shown below.  
OUTPUT CONNECTION  
Available Resolution  
1920 x 1080i  
1280 x 720p  
720 x 480p  
HDMI  
VIDEO OUT  
1920 x 1080i  
1280 x 720p  
720 x 480p  
720 x 480i  
COMPONENT  
VIDEO OUT  
720 x 480i  
720 x 480i  
VIDEO OUT  
S-VIDEO  
Video and Audio Connections  
to Your TV  
Notes:  
Make sure the DVD player is connected directly to the  
TV and not to a VCR, otherwise the DVD image could  
be distorted by the copy protection system.  
• For Video and S-Video connections, resolution must  
be set to 480i or 480p by pressing RESOLUTION  
button, however Video OUT and S-Video OUT is  
always at 480i standard resolution.  
S-Video: Connect the S-VIDEO OUT jack on the  
DVD Player to the S-Video in jack on the TV using  
the S-Video cable (S)  
• If your TV does not accept your resolution setting,  
abnormal picture appears on the screen.  
Please read TV’s owner’s manual then set the  
resolution that your TV can accept.  
Video – Connect the VIDEO OUT jack on the  
DVD player to the video in jack on the TV using  
the video cable (V)  
• For 720p and 1080i resolution on the component  
video out, only non-copy protected discs can be  
played back.If the disc is copy protected, it will be  
displayed at the 480p resolution without HDMI  
cable connection. With HDMI cable connection, the  
picture may not be displayed properly.  
Audio – Connect the left and right AUDIO OUT jacks  
of the DVD Player to the audio left and right IN jacks  
on the TV (A) using the audio cables.  
Do not connect the DVD Player’s AUDIO OUT jack to  
the phone in jack (record deck) of your audio system.  
9
 
HDMI connection  
If you have a HDMI TV or monitor, you can connect it  
to this player using a HDMI cable.  
HDMI compatible TV  
HDMI  
1. Set the TV’s source to HDMI (refer to TV’s  
Owner’s manual).  
H
2. Connect the HDMI OUT jack on the unit to the  
HDMI jack on a HDMI compatible TV or  
monitor (H).  
3. Press RESOLUTION repeatedly to select the  
desired resolution.  
Notes :  
• Both PCM and Bitstream Audio out is available,  
when the sample frequency is set to 48kHz in HDMI  
connection.  
Rear of DVD player  
About HDMI  
• If Audio setup is set to bitstream and your TV does  
not support Bitstream Audio out in HDMI  
connection, audio sound may not output or  
distorted.  
HDMI (High Definition Multimedia Interface) supports  
both video and audio on a single digital connection for  
use with DVD Players, Set-Top Boxes, and other AV  
devices.  
HDMI was developed to provide the technologies of  
HDCP (High-bandwidth Digital Content Protection).  
HDCP is used to protect digital content transmitted  
and received.  
• When the no sound or noisy sound are output with  
HDMI connection, set the Audio option [Dolby  
Digital, DTS or MPEG] in the SETUP menu to PCM  
or Off.  
• The arrow on the cable connector body should face  
up for correct alignment with the connector on the  
player.  
HDMI has the capability to support standard,  
enhanced, or high-definition video plus standard to  
multi-channel surround-sound audio, HDMI features  
include uncompressed digital video, a bandwidth of up  
to 5 gigabytes per second, one connector (instead of  
several cables and connectors), and communication  
between the AV source and AV devices such as  
DTVs.  
HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI licensing LLC.  
• If there is noise or lines on the screen, please  
check the HDMI cable.  
• Not all HDCP-compatible DVI devices will work with  
this unit.  
• If your HDMI TV does not support HDCP,  
the blue screen appears on the screen.  
Tip:  
When you use HDMI connection,you can change the  
resolution (480i,480p,720p,1080i)for the HDMI  
output.  
The HDMI will out at 480p resolution,even if you set  
the resolution to 480i on the HDMI connection.  
10  
 
Amplifier equipped with 2-channel analog stereo  
or Dolby Pro Logic ll / Pro Logic: Connect the left  
and right AUDIO OUT jacks on the DVD player to the  
audio left and right IN jacks on your amplifier,  
Audio Connection to Optional  
Equipment  
receiver, or stereo system, using the audio cables (A).  
Connect the DVD player to your optional equipment  
for audio output.  
Amplifier equipped with 2-channel digital stereo  
(PCM) or audio / video receiver equipped with a  
multi-channel decoder (Dolby Digital™, MPEG 2,  
or DTS): Connect one of the DVD Player’s DIGITAL  
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the  
corresponding in jack on your amplifier. Use an  
optional digital (OPTICAL O or COAXIAL X) audio  
cable.  
Rear of DVD player  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel audio  
/ video receiver that supports one or more of the  
audio formats supported by your DVD player such as  
MPEG 2, Dolby Digital and DTS. Check the receiver  
manual and the logos on the front of the receiver.  
O
X
A
Notes:  
If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver produces  
a strong, distorted sound or no sound at all.  
L
R
COAXIAL  
DIGITAL INPUT  
OPTICAL  
DIGITAL INPUT  
AUDIO INPUT  
Amplifier (Receiver)  
• Six Channel Digital Surround Sound via a digital  
connection can only be obtained if your receiver is  
equipped with a Digital Multi-channel decoder.  
Manufactured under license from Dolby  
Laboratories. “Dolby”, “Pro Logic”, and  
the double-D symbol are trademarks of  
Dolby Laboratories.  
DTS and DTS Digital Out are trademarks  
of Digital Theater Systems, Inc.  
11  
 
Displaying Disc Information  
on-screen  
Initial Settings  
By using the Setup menu, you can make various  
adjustments to items such as picture and sound. You  
can also set a language for the subtitles and the  
Setup menu, among other things. For details on each  
Setup menu item, see pages 13 to 15.  
You can display various information about the disc  
loaded on-screen.  
1. Press DISPLAY to show various playback  
information.  
To display and exit the Menu:  
Press SETUP to display the menu. A second press of  
SETUP will take you back to initial screen.  
The items displayed differ depending on the disc  
type or playing status.  
To go to the next level:  
Press B on the remote control.  
1 / 3  
1 / 12  
To go back to the previous level:  
Press b on the remote control.  
0:20:09  
General Operation  
ABC  
1. Press SETUP. The Setup menu appears.  
1 ENG  
1 / 1  
3D SUR.  
2. You can select an item by pressing v / V and  
change or select the setting by pressing b / B.  
Title (Track) – Current title (or track).  
number/total number of titles (or tracks).  
Chapter – Current chapter number/total number  
of chapters.  
Time – Elapsed playing time.  
Audio – Selected audio language or channel.  
Subtitle – Selected subtitle.  
2. Use v / V to select the desired option then press  
B to move to the second level. The screen shows  
the current setting for the selected item, as well as  
alternate setting(s).  
Angle – Selected angle/total number of angles.  
Sound – Selected sound mode.  
3. Use v / V to select the second desired option then  
press B to move to the third level.  
4. Use v / V to select the desired setting then press  
ENTER to confirm your selection. Some items  
require additional steps.  
Note:  
If no button is pressed for a few seconds, the on-  
screen display disappears.  
5. Press SETUP or PLAY to exit the Setup menu.  
12  
 
AUDIO  
LANGUAGE  
Each DVD disc has a variety of audio output options.  
Set the player’s AUDIO options according to the type  
of audio system you use.  
Menu Language  
Select a language for the Setup menu and on-screen  
display.  
Dolby Digital / DTS / MPEG  
Disc Audio / Subtitle / Menu  
Bitstream – Select “Bitstream” if you connect this  
unit’s DIGITAL OUT jack to an amplifier or other  
equipment with a Dolby Digital, DTS or MPEG  
decoder.  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
Original – Refers to the original language in which  
the disc was recorded.  
PCM (for Dolby Digital / MPEG) – Select when  
connected to a two-channel digital stereo amplifier.  
DVDs encoded in Dolby Digital or MPEG will be  
automatically downmixed to two-channel PCM  
audio.  
Other To select another language, press number  
buttons then ENTER to enter the corresponding 4-  
digit number according to the language code list  
on page 25. If you enter the wrong language code,  
press CLEAR.  
Off (for DTS): If you select “Off”, the DTS signal is  
not output through the DIGITAL OUT jack.  
Off (for Disc Subtitle) – Turn off Subtitle.  
Sample Freq. (Frequency)  
DISPLAY  
If your receiver or amplifier is NOT capable of  
handling 96 kHz signals, select 48 kHz. When this  
choice is made, this unit automatically converts any  
96 kHz signals to 48 kHz so your system can decode  
them.  
If your receiver or amplifier is capable of handling 96  
kHz signals, select 96 kHz.  
Check the documentation for your amplifier to verify  
its capabilities.  
TV Aspect  
Dynamic Range Control (DRC)  
4:3 – Select when a standard 4:3 TV is connected.  
16:9 – Select when a 16:9 wide TV is connected.  
With the DVD format, you can hear a program’s  
soundtrack in the most accurate and realistic  
presentation possible. However, you may wish to  
compress the dynamic range of the audio output (the  
difference between the loudest sounds and the  
quietest ones). This allows you to listen to a movie at  
a lower volume without losing clarity of sound. Set  
DRC to On for this effect.  
Display Mode  
Display Mode setting works only when the TV Aspect  
mode is set to “4:3”.  
Letterbox – Displays a wide picture with bands on  
the upper and lower portions of the screen.  
Vocal  
Panscan – Automatically displays the wide picture  
on the entire screen and cuts off the portions that  
do not fit.  
Set to On only when a multi-channel karaoke DVD is  
playing. The karaoke channels on the disc mix into  
normal stereo sound.  
13  
 
Area Code  
LOCK (Parental Control)  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list on  
page 25.  
1. Select “Area Code” on the LOCK menu then  
press B.  
2. Follow step 2 as shown left (Rating).  
3. Select the first character using v / V buttons.  
4. Press B and select the second character using  
Rating  
v / V buttons.  
Blocks playback of rated DVDs based on their  
content. Not all discs are rated.  
5. Press ENTER to confirm your Area code selection.  
1. Select “Rating” on the LOCK menu then  
press B.  
2. To access the LOCK options, you must input the  
password you have created. If you have not yet  
entered password, you are prompted to do so.  
Input a password and press ENTER. Enter it again  
and press ENTER to verify. If you make a mistake  
before pressing ENTER, press CLEAR.  
3. Select a rating from 1 to 8 using the v / V buttons.  
Rating 1-8: Rating one (1) has the most  
restrictions and rating eight (8) is the least  
restrictive.  
Unlock: If you select unlock, parental control is  
not active and the disc plays in full.  
4. Press ENTER to confirm your rating selection, then  
press SETUP to exit the menu.  
Password  
You can enter or change password.  
1. Select Password on the LOCK menu then press B.  
2. Follow step 2 as shown above (Rating).  
To change the password, press ENTER when the  
“Change” option is highlighted. Input a password  
and press ENTER. Enter it again and press  
ENTER to verify.  
3. Press SETUP to exit the menu.  
If you forget your password  
If you forget your password, you can clear it using the  
following steps:  
1. Press SETUP to display the Setup menu.  
2. Input the 6-digit number “210499” and press  
ENTER. The password is cleared.  
14  
 
DivX(R) VOD  
OTHERS  
We provide you the DivX® VOD (Video On Demand)  
registration code that allows you to rent and purchase  
videos using the DivX® VOD service. For more  
1. Select “DivX(R) VOD” option then press B.  
2. Press ENTER while “Select” is selected and the  
registration code will appear.  
Use the registration code to purchase or rent the  
videos from DivX® VOD service at  
download the video onto a disc for playback on  
this unit.  
PBC  
Set Playback Control (PBC) to On or Off.  
3. Press ENTER to exit.  
On: Video CDs with PBC are played according to  
the PBC.  
Note:  
All the downloaded videos from DivX® VOD can only  
be played back on this unit.  
Off: Video CDs with PBC are played the same  
way as Audio CDs.  
Auto Play  
You can set up the unit so a DVD disc automatically  
starts playing whenever the DVD is inserted.  
If Auto Play mode is set to On, this unit will search for  
title that has the longest playback time and then play  
back the title automatically.  
Note:  
The Auto Play function may not work for some DVDs.  
B.L.E. (Black Level Expansion)  
To select the black level of playback pictures. Set your  
preference and monitor’s ability.  
On: Expanded grey scale. (0 IRE cut off)  
Off: Standard grey scale. (7.5 IRE cut off)  
15  
 
Operations  
General features  
Buttons  
Operations  
Discs  
ALL  
Z (OPEN / CLOSE)  
X (PAUSE)  
Opens or closes the disc tray.  
ALL  
During playback, press X to pause playback.  
DVD-V  
DivX  
ALL  
DVD-A  
VCD  
Press X repeatedly to play Frame-by-Frame.  
SKIP (. / >)  
During playback, press SKIP (. or >) to go to the  
next chapter/track or to return to the beginning of the  
current chapter/track.  
Press SKIP . twice briefly to step back to the previous  
chapter/track.  
SCAN (m / M)  
During playback, press SCAN (m or M) repeatedly to  
select the required scan speed.  
DVD, DivX disc; 4 steps  
DVD-V  
DVD-A  
VCD  
MP3  
DivX  
ACD  
Video CD, MP3, Audio CD ; 3 steps  
While the playback is paused, press SCAN M  
DVD-V  
DVD-A  
VCD  
repeatedly to play in slow motion (4 steps, forward only).  
DivX  
REPEAT  
A-B  
During playback, press REPEAT repeatedly to select a  
desired repeat mode.  
DVD Video discs: Chapter/Title/Off  
ALL  
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off  
During playback, each press of A-B button to select point  
A and point B and repeats a sequence from point A  
(Starting point) to point B (End point).  
DVD-V  
VCD  
ACD  
DivX  
Press CLEAR to exit.  
ZOOM  
During playback or pause mode, press ZOOM to enlarge  
the video image (3 steps).  
DVD-V  
VCD  
DIVX  
You can move through the zoomed picture using b B v V  
buttons. Press CLEAR to exit.  
ACD  
MP3  
RANDOM  
TITLE  
During playback or in stop mode, press RANDOM for  
random playback.  
WMA  
If the current DVD title has a menu, the title menu  
appears on the screen. Otherwise, the disc menu may  
appears.  
DVD-V  
DVD-A  
DVD MENU  
(ANGLE)  
The disc menu appears on the screen.  
DVD-V  
DVD-V  
DVD-A  
DVD-A  
During playback of DVD disc contains scenes recorded  
different camera angles, press ANGLE repeatedly to  
select a desired angle.  
DVD-V  
DivX  
(SUBTITLE)  
(AUDIO)  
During playback, press SUBTITLE repeatedly to select a  
desired subtitle language.  
DVD-V  
DVD-A  
DivX  
During playback, press AUDIO repeatedly to hear a  
different audio language or audio track.  
VCD  
ACD  
16  
 
Notes on general features:  
Marker Search  
DVD-V  
VCD  
DivX  
• On a Video CD with PBC, you must set PBC to Off  
on the setup menu to use the repeat function (See  
“PBC” on page 15).  
To enter a Marker  
You can start playback from up to nine memorized  
points. To enter a marker, press MARKER at the  
desired point on the disc. The Marker icon appears on  
the TV screen briefly. Repeat to enter up to nine  
markers.  
• If you press SKIP (>) once during Repeat Chapter  
(Track) playback, the repeat playback cancels.  
• Zoom may not work on some DVDs.  
• When you are playing a DVD disc contains scenes  
recorded different camera angles, the angle indicator  
will blink on the TV screen during scenes recorded  
at different angles as an indication that angle  
switching is possible.  
To Recall or Clear a Marked Scene  
1. During disc playback, press SEARCH. The marker  
search menu appears on the screen.  
2. Within 10 seconds, press b / B to select a marker  
number that you want to recall or clear.  
• The A-B repeat function is available only in the  
current track.  
3. Press ENTER and playback starts from the marked  
scene. Or, Press CLEAR and the marker number is  
erased from the list.  
Additional features  
3D Surround  
4. You can play any marker by inputting its number on  
the marker search menu.  
To produce a 3D surround effect that simulates multi-  
channel audio from two stereo speakers (instead of the  
five+ speakers normally required for multi-channel  
audio from a home theater system).  
Last Scene Memory DVD-V  
ACD  
VCD1.1  
This player memorizes last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the player or switch  
off the player. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
DVD-V  
VCD  
DivX  
1. Press DISPLAY during playback.  
Note:  
2. Use 3 or 4 to select the sound option.  
This player does not memorize the scene of a disc if  
you switch off the player before commencing to play  
the disc.  
The sound option will be highlighted.  
3. Use 1 or 2 to to select “3D SUR”.  
To turn off the 3D Surround effect, select “Normal”.  
Screen Saver  
ACD  
The screen saver appears when you leave the DVD  
player in Stop mode for about five minutes. If the  
Screen Saver is displayed for five minutes, the DVD  
Player automatically turns itself off.  
1. Press AUDIO during playback.  
“3D SUR.” appears on the menu screen.  
2. To return to normal playback, press AUDIO  
repeatedly until “3D SUR.” disappears from the  
menu screen.  
Time Search DVD-V  
VCD  
DivX  
To start playing at any chosen time on the disc:  
1. Press DISPLAY during playback.  
2. Press v / V to select the time clock icon and  
“--:--:--” appears.  
3. Input the required start time in hours, minutes, and  
seconds from left to right. If you enter the wrong  
numbers, press CLEAR to remove the numbers  
you entered. Then input the correct numbers.  
4. Press ENTER to confirm. Playback starts from the  
selected time.  
17  
 
DVD Audio Discs  
Moving to another GROUP  
DVD Audio is a new disc format building on the  
success of DVD to provide high quality,  
uncompressed, multi-channel audio for a new  
experience in audio quality. A DVD Audio disc can be  
identified by the DVD audio logo on the disc jacket or  
on the disc itself.  
Some DVD Audio discs divide content into different  
groups. Your player enables you to quickly access  
different groups during playback via the on-screen  
display.  
1. Press DISPLAY during playback on in stop mode.  
2. Press 3/4 to select Group icon.  
DVD Audio can provide higher quality stereo than  
Audio CDs with a sampling rate of up to 192kHz  
(compared to 44.1kHz for CDs). DVD Audio digital  
sound can be delivered with up to 24 bits of data  
(compared to 16 bits for a standard CD).  
3. Press 1/2 or the numbered buttons (0-9) to select  
a group number.  
Note:  
Sometimes the author of the disc creates hidden  
content that can only be accessed by entering a  
password. If the lock icon appears on the TV screen,  
enter the password (sometimes you’ll find it on the  
disc’s jacket cover or on a web site). This password  
control isn’t dictated by your DVD Player — it is a  
function of the disc.  
A typical DVD Audio disc contains up to seven times  
the data capacity of a CD. This additional space is  
used for music, either Advanced Resolution multi-  
channel sound quality that is closer to the artist’s  
master recording or for longer recordings. Many DVD  
Audio discs contain on-screen text, such as artist  
biographies, playlists, or lyrics. Some DVD Audio  
discs contain photo galleries or video clips.  
Since the authoring of DVD Audio Discs varies, some  
of the on-screen display choices might not be  
available for the disc you’re playing.  
Viewing another PAGE  
Since DVD Audio discs can hold a lot of content, there  
are various ways to see what’s available on the disc.  
1. Press DISPLAY during playback.  
2. Press 3/4 to select Page icon.  
3. Press 1/2 to select a page number.  
What appears on the screen will vary from disc to  
disc because the information available depends  
upon the way the disc was created.  
Note:  
Since the authoring of DVD Audio Discs varies, some  
of the on-screen display choices might not be  
available for the disc you’re playing.  
18  
 
Playing an Memory Card M/C  
(DNX191H, DNX193H ONLY)  
You can play PHOTO and MUSIC and MOVIE files  
in Memory Cards with this DVD player.  
1. Insert a Memory Card until it fits into place.  
2. Press MEMORY on the front panel.  
The Memory Card slot choice menu appears on  
the TV screen.  
Note:  
If both slots are connected with Memory Card,  
use b / B to select the desired Memory Card slot.  
3. Press ENTER.  
The menu appears.  
4. Press MEMORY to exit the menu.  
For details on each operation item, refer to  
relevant page. (See page 20-22)  
Cards capable of displaying  
Readable Cards  
• Compact Flash Card (CF)  
• Micro Drive (MD)  
• Secure Digital Card (SD)  
• Multi Media Card (MMC)  
• Memory Stick (MS)  
• Memory Stick Pro (MS-Pro)  
• eXtreme Digital picture Card (xD)  
- Compatible with: FAT 12, FAT 16, or FAT 32  
- Only use the memory cards recommended.  
Regarding Write Protect  
For cards that have a write protect switch, if the switch  
is on it will not be possible to write or erase the  
contents of the card.  
Notes:  
• Keep the memory card out of reach of children.  
If swallowed, seek medical advice immediately.  
• This player can not format a memory card.  
• The reading time depends on file size or resolution.  
• If a folder in your memory cards have more than  
645 files, the whole files are not available to read.  
Caution  
Before you extract your memory cards, you should  
press the MEMORY button to display the DVD menu  
screen. Otherwise you will lose your data in your  
memory card or the memory card can be damaged.  
19  
 
Playing an Audio CD or  
MP3/WMA file  
This unit can play Audio CDs or MP3/WMA files  
recorded media.  
Programmed Playback  
The program function enables you to store your  
favorite tracks from any disc in the player memory.  
A program can contain 30 tracks.  
1. Insert an Audio CD or MP3/WMA files recorded  
media. AUDIO CD or MUSIC menu appears.  
MP3/ WMA/ Audio CD  
Once you insert an MP3/WMA files recorded media or  
Audio CD, a menu appears on the TV screen.  
Press v / V to select a track/file then press PLAY or  
ENTER and playback starts. You can use variable  
playback functions. Refer to page 16-17.  
E
2. Press PROGRAM and the  
mark will appear  
Note:  
Press PROGRAM again to exit the program edit  
E
mode, then the  
mark will disappear.  
3. Select a track on the “List”, then press ENTER to  
place the selected track on the “Program” list.  
Repeat to place additional tracks on the list.  
4. Select the track you want to start playing on the  
“Program” list.  
5. Press PLAY or ENTER to start. Playback begins in  
the order in which you programmed the tracks.  
Playback stops after all of the tracks on the  
“Program” list have played once.  
ID3 TAG  
• When playing a file containing information such as  
track titles, you can see the information by pressing  
DISPLAY.  
6. To resume normal playback from programmed  
playback, select a track on the list and then press  
PLAY.  
[ Song, Artist, Album, Comment, Genre ]  
Tips:  
Repeat Programmed Tracks  
• Press DVD MENU to move to the next page.  
Press REPEAT to select a desired repeat mode.  
• On a CD with MP3/WMA and JPEG you can switch  
MP3/WMA and JPEG. Press TITLE and MUSIC or  
• Track: repeats the current track  
• All: repeats all the tracks on programmed list.  
• Off(No display): does not play repeatedly.  
PHOTO word on top of the menu is highlighted.  
Note:  
MP3 / WMA disc compatibility with this player is  
limited as follows:  
• Sampling frequency: within 8 - 48 kHz (MP3),  
within 32 - 48kHz (WMA)  
If you press > once during Repeat Track playback,  
the repeat playback cancels.  
Erasing a Track from “Program” List  
• Bit rate: within 8 - 320kbps (MP3),  
32 - 384 kbps (WMA)  
E
1. During STOP mode, press PROGRAM and the  
mark will appear  
• The player cannot read an MP3/WMA file that has  
a file extension other than “.mp3” / “.wma”.  
• CD-R physical format should be ISO 9660  
• If you record MP3 / WMA files using software that  
cannot create a file system (eg. Direct-CD) it is  
impossible to playback MP3 / WMA files. We  
recommend that you use Easy-CD Creator, which  
creates an ISO 9660 file system.  
2. Use v V b B to select the track that you wish to  
erase from the Program list.  
3. Press CLEAR. Repeat step 1~3 to erase additional  
tracks on the list.  
Erasing the Complete Program List  
E
1. During STOP mode, press PROGRAM and the  
• File names should have a maximum of 8 letters  
and must incorporate an .mp3 or .wma extension.  
• They should not contain special letters such as / ?  
* : “ < > l etc.  
• The total number of files in a folder should be less  
than 1190 files.  
mark will appear  
2. Use v V b B to select “Clear All”, then press  
ENTER.  
Note:  
The programs are also cleared when the power is off  
or the disc is removed.  
20  
 
Zoom  
Viewing a JPEG file  
During watching pictures, press ZOOM to enlarge the  
video image (3 steps).  
This unit can play JPEG files recorded media.  
You can move through the zoomed picture using b B  
v V buttons.  
1. Insert a JPEG files recorded media. The PHOTO  
menu appears on the TV screen.  
Note:  
When the resolution is set to 720p or 1080i,  
this function is not available.  
To rotate picture  
Press v / V during showing a picture to rotate the  
picture clockwise or counter clockwise.  
To listen to MP3 music while watching  
picture  
2. Press v / V to select a folder, and press ENTER.  
A list of files in the folder appears.  
1. Insert the disc containing the two types of file in  
the player.  
3. If you want to view a particular file, press  
v / V to highlight a file and press ENTER or PLAY.  
2. Press TITLE to display PHOTO menu.  
4. To return to the PHOTO menu while watching  
pictures, press STOP.  
3. Press v / V to select a photo file.  
4. Use B to select  
icon then press ENTER.  
Tips:  
Playback starts. The playback will continue until  
STOP is pressed.  
• If you are in a file list and want to return to the  
previous Folder list, use v / V buttons to highlight  
and press ENTER.  
Note:  
When the resolution is set to 720p or 1080i,  
this function is not available.  
• Press DVD MENU to move to the next page.  
• There are three Slide Speed options  
(Fast), >> (Normal) and > (Slow).  
: >>>  
This function is not available for Memory Card.  
Tip:  
Use v V b B to highlight  
select the option you want to use then press  
. Then, use b / B to  
To listen to only the desired music while watching  
picture, program the desired tracks from the “MUSIC”  
menu and then proceed as above.  
ENTER.  
• On a disc with MP3/WMA and JPEG you can switch  
MP3/WMA and JPEG. Press TITLE and MUSIC or  
PHOTO word on top of the menu is highlighted.  
JPEG disc compatibility with this player is  
limited as follows:  
• While watching a picture, press RETURN to hide  
the help menu.  
• Depending upon the size and number of JPEG  
files, it could take a long time for the DVD player  
to read the disc’s contents. If you do not see an  
on-screen display after several minutes, some of  
the files may be too large — reduce the resolution  
of the JPEG files to less than 5 million pixels and  
burn another disc.  
Slide Show  
Use v V b B to highlight the  
press ENTER.  
(Slide Show) then  
Still Picture  
1. Press PAUSE/STEP during slide show.  
The player will now go into PAUSE mode.  
• The total number of files in a folder should be less  
than 1190 files.  
2. To return to the slide show, press PLAY or press  
PAUSE/STEP again.  
• Some discs may be incompatible due to a  
different recording format or the condition of disc.  
Moving to another File  
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
Press SKIP (. or >) or cursor (b or B) once  
while viewing a picture to advance to the next or  
previous file.  
• If the files have “.jpe” or “.jpeg” extensions, please  
rename them as “.jpg” file.  
• File names without “.jpg” extension will not be  
able to be read by this unit. Even though the files  
are shown as JPEG image files in Windows  
Explorer.  
21  
 
Playing a DivX Movie file  
Using this DVD Player you can play DivX file.  
DivX disc compatibility with this player is limited  
as follows:  
Available resolution size of the DivX file is under  
720x576 (W x H) pixel.  
1. Insert a DivX file recorded media. The MOVIE  
menu appears on the TV screen.  
The file name of the DivX subtitle is available by  
56 characters.  
If there is impossible code to express in the DivX  
file, it may be displayed as “ _ ” mark on the  
display.  
• If the number of the screen frame is over 30  
per 1 second, this unit may not operate  
normally.  
2. Press v / V to select a folder, and press ENTER.  
A list of files in the folder appears.  
• If the video and audio structure of recorded  
file is not interleaved, either video or audio is  
outputted.  
3. If you want to view a particular file, press v / V to  
highlight a file and press ENTER or PLAY.  
You can use variable playback functions. Refer to  
page 16-17.  
• If the file is recorded with GMC, the unit  
supports only 1-point of the record level.  
GMC?  
*
4. Press STOP to stop the playback. The Movie  
menu appears  
GMC is the acronym for Global Motion  
Compensation. It is an encoding tool specified in  
MPEG4 standard. Some MPEG4 encoders, like  
DivX or Xvid, have this option.  
There are different levels of GMC encoding,  
usually called 1-point, 2-point, or 3-point GMC.  
Tips:  
• If you are in a file list and want to return to the  
previous Folder list, use the v / V buttons on the  
remote to highlight  
and press ENTER.  
Playable DivX file  
• Press DVD MENU to move to the next page.  
.avi, .mpg, .mpeg  
• On a CD with MP3/WMA, JPEG and MOVIE file,  
you can switch MUSIC, PHOTO and MOVIE menu.  
Press TITLE and MUSIC, PHOTO and MOVIE word  
on top of the menu is highlighted.  
Playable Subtitle format  
SubRip(*.srt/*.txt)  
SAMI(*.smi)  
SubStation Alpha(*.ssa/*.txt)  
MicroDVD(*.sub/*.txt)  
SubViewer 1.0(*.sub)  
SubViewer 2.0(*.sub/*.txt)  
TMPlayer(*.txt)  
• The disc subtitle may not be displayed properly, if a  
DivX subtitle is downloaded through the internet.  
• If the Disc Subtitle setup menu does not have the  
DivX subtitile language you are going to play, the  
subtitle may not be displayed properly.  
Playable Codec format  
“DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”,  
“MP43”, “3IVX”.  
Notice for displaying the DivX subtitle  
If the subtitle does not display properly during  
playback, press and hold SUBTITLE about 3 seconds  
then press b / B to select another language code until  
the subtitle is displayed properly.  
Playable Audio format  
“Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”.  
Sampling frequency: within 8 - 48 kHz (MP3),  
within 32 - 48kHz (WMA)  
Bit rate: within 8 - 320kbps (MP3),  
32 - 384kbps (WMA)  
Note:  
When the bitrate of video signal on a DivX file stored  
in a memory card is over 2Mbps, it can be displayed  
like a still image.  
Not all the WMA Audio format is compatible with  
this unit.  
22  
 
Code numbers of controllable TVs  
Controlling Your TV with the  
Supplied Remote  
If more than one code number is listed, try entering  
them one at a time until you find the one that works  
with your TV.  
You can control the sound level, input source, and  
power switch of your LG TV with the supplied remote.  
Manufacturer  
ADMIRAL  
AIWA  
Code Number  
Manufacturer  
MONTGOMERY  
WARD  
Code Number  
01,06,08,09  
23,24,32,33,34  
01,08,56  
16,33,37,44,45  
70  
By pressing  
POWER  
AV  
You can  
AKAI  
01  
NEC  
Turn the TV on or off.  
Switch the TV’s input source.  
AMARK  
09  
NOBLEX  
07  
AOC  
01  
PACKARD BELL  
PANASONIC  
PHILCO  
43  
BELL & HOWELL  
BROKSONIC  
CANDLE  
33  
07,11,13,25,35,36  
01,06,07,08,09,  
15,38,43,58  
06,07,43,61,62,65  
30  
18,19  
PR/CH +/–  
Scans up or down through  
memorized channels.  
51  
CCE  
07  
PHILIPS  
CENTURION  
CINERAL  
CITIZEN  
08  
PIONEER  
PORTLAND  
PROSCAN  
QUASAR  
RADIO SHACK  
RCA  
VOL +/–  
Adjust the volume of the TV.  
43  
09  
49,50,51,52,53,54,55  
03,37,44  
CORONADO  
CROWN  
09  
11,13  
Note:  
09  
16,17,23  
CURTIS MATHES  
DAEWOO  
DAYTRON  
EMERSON  
FISHER  
01,03,08,33,35,37,44  
16,38,39,40,41,42,43  
01,08  
01,03,37,44,69  
16,17,23  
Depending on the unit being connected, you may not  
be able to control your TV using some of the buttons.  
REALISTIC  
SAMPO  
08  
01,09,16,17,18,19  
28,29  
SAMSUNG  
SANYO  
01,08,09,25,68  
28,29  
Controlling other TVs with the remote  
FUNAI  
46,47  
SCOTT  
01,08  
GENERAL ELECTRIC 03,10,11,13,37,44  
SEARS  
09,25,26,27,28,29  
64  
You can control the sound level, input source, and  
power switch of non-LG TVs as well. If your TV is  
listed in the table below, set the appropriate  
manufacturer code.  
GRADIENTE  
HITACHI  
JC PENNEY  
JVC  
01,56,57,63,67  
09,14,15,43  
01,08,10,27,35  
20,21,63,67  
43  
SEMP  
SHARP  
09,22,23,24,60,66  
01,06,08,09,10,  
23,24,33,34  
12,62,93  
SIGNATURE 2000  
KIOTE  
SONY  
KMC  
09  
SOUNDESIGN  
SYLVANIA  
51  
1. While holding down TV POWER button, press the  
number buttons to select the manufacturer code  
for your TV (see the table below).  
KTV  
01,08,09,31  
01,07,08,09,35,39,40  
33  
01,04,05,06,07,  
08,35,51  
LG (GOLDSTAR)  
LODGENET  
LOGIK  
SYMPHONIC  
TATUNG  
TEKNIKA  
TELERENT  
THOMSON  
YORX  
46,47  
33  
11  
2. Release TV POWER button.  
LXI  
09,24,25,26,27,28,29  
01,02,04,05,06,  
07,08,09,20,  
34,35,43,51,61,62,65  
33  
07,09,16,33,51  
09,33  
MAGNAVOX  
69  
08  
MAJESTIC  
TOSHIBA  
WARDS  
01,25,26,27,64  
01,06,08,09,10,33,34  
48  
MARANTZ  
01,32  
MEMOREX  
33  
XR1000  
MGA/MITSUBISHI  
01,08,32,34  
ZENITH  
01,02,33,59  
Notes:  
Depending on your TV, some or all buttons may not  
function on the TV, even after entering the correct  
manufacturer code.  
If you enter a new code number, the code number  
previously entered will be erased.  
When you replace the batteries of the remote, the code  
number you have set may be reset to the default  
setting. Set the appropriate code number again.  
23  
 
Maintenance and Service  
Refer to the information in this chapter before  
contacting a service technician.  
Handling the Unit  
When shipping the unit  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed  
at the factory.  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide  
spray near the unit.  
Do not leave rubber or plastic products in contact  
with the unit for a long period of time. since they  
leave marks on the surface.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution.  
Do not use strong solvents such as alcohol, benzine,  
or thinner, as these might damage the surface of the  
unit.  
Maintaining the Unit  
The unit is a high-tech, precision device. If the optical  
pick-up lens and disc drive parts are dirty or worn, the  
picture quality could be diminished.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
For details, please contact your nearest authorized  
service center.  
24  
 
Reference  
Language Codes  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Tamil  
Tatar  
Hebrew  
Hindi  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Korean  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Sindhi  
Area Codes  
Choose a Area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Ethiopia  
Fiji  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Code  
ET  
FJ  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Area  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Code  
SA  
SN  
SG  
SK  
SI  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
Malaysia  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
FI  
FR  
DE  
GB  
GR  
GL  
BE  
BT  
ZA  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
KR  
ES  
LK  
NL  
Herd and Mcdonald Islands HM  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
Kuwait  
Libya  
Luxembourg  
HK  
HU  
IN  
ID  
IL  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
IT  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
JM  
JP  
KE  
KW  
LY  
LU  
PT  
RO  
El Salvador  
Zimbabwe  
25  
 
Troubleshooting  
Possible Cause  
Correction  
Symptom  
• The power cord is disconnected.  
• Plug the power cord into the wall outlet  
securely.  
No power.  
• No disc is inserted.  
• Insert a disc. (Check the disc indicator  
in the display window is lit.)  
The power is on, but  
the DVD player does  
not work.  
• The TV is not set to receive DVD  
signal output.  
• Select the appropriate video input  
mode on the TV.  
No picture.  
• The video cable is not connected  
securely.  
• Connect the video cable securely.  
• The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
• Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD player.  
No sound.  
The power of the equipment connected • Turn on the equipment connected with  
with the audio cable is turned off.  
the audio cable.  
• The AUDIO options are set to the  
wrong position.  
• Set the AUDIO option to the correct  
position, then turn on the DVD player  
again by pressing POWER.  
• An unplayable disc is inserted.  
• The rating level is set.  
• Insert a playable disc. (Check the disc  
type and regional code.)  
The DVD player does  
not start playback.  
• Change the rating level.  
• The remote control is not pointed at  
the remote sensor on the DVD player.  
• Point the remote control at the remote  
sensor of the DVD player.  
The remote control  
does not work properly.  
• The remote control is too far from the  
DVD player.  
• Operate the remote control closer to  
the DVD player.  
Specifications  
DIGITAL OUT (COAXIAL):  
0.5 V (p-p), 75 Ω, RCA jack x 1  
General  
Power requirements: AC 120 V, 60 Hz  
Power consumption: 10W  
Dimensions (Approx.):  
430 x 35 x 242 mm (17 x 1.4 x 9.5 inches)  
(W x H x D) without foot  
DIGITAL OUT (OPTICAL):  
3 V (p-p), 75 Ω, Optical jack x 1  
System  
Laser:  
Weight (Approx.): 1.9 kg (4.2 lbs)  
Semiconductor laser, wavelength 650 nm  
Operating temperature:  
5 °C to 35 °C (41 °F to 95 °F)  
Signal system: NTSC  
Frequency response:  
Operating humidity: 5 % to 90 %  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Outputs  
VIDEO OUT:  
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1  
Signal-to-noise ratio:  
More than 100 dB (ANALOG OUT connectors only)  
S-VIDEO OUT:  
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 Ω  
Harmonic distortion: Less than 0.008%  
Dynamic range:  
More than 95 dB (DVD/CD)  
COMPONENT VIDEO OUT:  
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2  
Accessories:  
Video cable (1), Audio cable (1), Remote control (1),  
Batteries (2)  
AUDIO OUT:  
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1  
Note: Design and specifications are subject to change prior notice.  
26  
 
LG Electronics, Inc.  
Limited Warranty - USA  
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or  
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date  
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser  
of the product and effective only when used in the United States, excluding U.S. Territories.  
WARRANTY PERIOD:  
HOW SERVICE IS HANDLED:  
LABOR: 90 days from the Date of Purchase.  
Call 1-800-243-0000 for instructions on getting the  
defective unit repaired or replaced.  
PARTS: One Year from the Date of Purchase.  
Please retain dated sales receipt and your box to  
return the unit to LG for repair or replacement.  
* Parts replaced are warranted for the remaining portion  
of the original warranty period.  
Shipping both ways will be paid by LG during the first  
90 days of the Warranty Period. During the remainder  
of the Warranty Period (91~365 days), you pay inbound  
shipping charges and LG pays return shipping charges.  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,  
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED  
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG  
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE  
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT  
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE  
WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or  
consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to  
you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
Damages or operating problems that result from shipping, installation, adjustment of user controls,  
calibration, maintenance or failure to maintain, or separate system components; and  
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside  
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,  
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current  
or voltage, signal reception or input, software not licensed directly by LG, software errors that do not disable  
functionality, operating and software protocols adopted after the date of manufacture or for outside the US,  
institutional or commercial use, or other causes not arising out of defect in material or workmanship.  
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.  
CUSTOMER INTER-ACTIVE CENTER NUMBERS:  
For Warranty Service, Where to buy, Product  
Assistance, or Customer Assistance  
Call 1-800-243-0000 (24 hours a day, 365 days per year)  
and select appropriate options from the menu.  
Or visit our website at http://www.lgservice.com  
LG ELECTRONICS U.S.A., INC.  
1000 SYLVAN AVENUE  
P/N : 3834RD0082Z  
Issue O  
ENGLEWOOD CLIFFS, NJ  
Printed in China  
 

Lenovo Laptop B460E User Manual
Life Fitness Elliptical Trainer 95XE 0XXX 02 User Manual
Life Fitness Home Gym SU45 User Manual
Linear TV Receiver DXR 701 User Manual
Manitowoc Ice Ice Maker QM30 Series User Manual
Marvel Industries Refrigerator 5CAF fmar User Manual
Memorex MP3 Player MP3115 User Manual
Metra Electronics Handheld Game System 95 8150 User Manual
Meyer Sound Speaker M3D SUB User Manual
Midland Radio Portable Radio MO 1008 User Manual