Liebherr Refrigerator HC 1011 1060 HC 1001 1050 121113 7082698 00 User Manual

Use and Care  
Manual  
Combined fridge-freezer, fully  
integrated  
HC 1011/1060 HC 1001/1050  
121113 7082698 - 00  
 
The appliance at a glance  
1.2 Overview  
1.3 Range of appliance use  
The appliance is only suitable for refrigerating  
food in a domestic environment or an environ-  
ment that is similar to a domestic one. This  
includes, for example, use  
-
-
-
in staff kitchens, bed and breakfast establish-  
ments,  
by guests in country houses, hotels, motels  
and other accommodation facilities,  
for catering and similar services in wholesale  
premises  
Only use the appliance in a normal domestic  
setting. No other types of use are permissible.  
The appliance is not suitable for storing and  
refrigerating medicines, blood plasma, labora-  
tory preparations or similar substances and  
products referred to in CMDCAS and FDA 510  
(k). Misuse of the appliance may lead to damage  
to or spoiling of the goods stored. In addition the  
appliance is not suitable for operating in areas at  
risk of explosions.  
The appliance is set to operate within specific  
ambient temperature limits according to its  
climate rating. The climate rating for your appli-  
ance is printed on the rating plate.  
Note  
Compliance with the specified ambient  
temperatures is required, otherwise the refrig-  
eration performance is reduced.  
u
Climate  
rating  
for ambient temperatures from  
SN  
N
50 °F (10 °C) to 90 °F (32 °C)  
61 °F (16 °C) to 90 °F (32 °C)  
61 °F (16 °C) to 101 °F (38 °C)  
61 °F (16 °C) to 110 °F (43 °C)  
Fig. 1  
ST  
T
(1) Operating and control (10)Coldest zone  
elements  
(2) Butter and cheese  
compartment  
(11)Vegetable drawer  
1.4 Conformity  
The refrigerant circuit has been tested for leaks. When  
installed, the appliance complies with the relevant safety  
regulations and the safety standards UL250 and  
CAN/CSA C22.2 No. 63-93.  
(3) Fan  
(12)Drain hole  
(4) Shelf, moveable  
(5) Storage rack for jars  
(13)Rating plate  
(14)LED lighting, freezer  
compartment*  
(6) Shelf, can be split  
(15)IceMaker*  
(7) LED lighting, refriger- (16)Info system*  
Instructions for testing institutes:  
ator compartment*  
Tests must be carried out in accordance with the appli-  
(8) Lighting with incan-  
descent lamp, refrig-  
erator compartment*  
(9) Door rack for tall  
bottles  
(17)Freezer compartment  
cable standards and guidelines.  
The preparation and testing of the appliance must be  
carried out taking account of the manufacturer's  
loading plans and the instructions in the operating  
manual .  
(18)VarioSpace  
* Depending on model and options  
3
 
 
General safety information  
-
-
All repairs to or work on the IceMaker must  
only be carried out by the customer service  
department or other specialist engineers  
trained to do this.*  
1.5 Energy saving  
Always ensure good ventilation. Do not obstruct venti-  
-
-
-
-
-
-
-
lation openings or grilles.  
Do not install the appliance in direct sunlight or next to  
an oven, heater, or similar heat source.  
Energy consumption depends on installation conditions  
Avoid opening the appliance door for any longer then  
neccesary.  
The manufacturer is not liable for damage  
arising from incorrect connection to the water  
supply.*  
Risk of fire:  
-
The lower the temperature is set the higher the energy  
consumption.  
Do not operate the appliance near explosive  
gases.  
All food stored in the appliance should be well wrapped  
and covered. This prevents frost buildup.  
Only take food out for as long as necessary so that it  
does not get too warm.  
-
Do not store explosive materials or spray cans  
with flammable propellants, such as e.g.  
butane, propane, pentane, etc. in the appli-  
ance. You can recognize such spray cans by  
the printed contents or a flame symbol. Any  
leaking gasses can be ignited by electrical  
components.  
Storing hot food: let it cool to room temperature first.  
Defrost frozen food in the fridge.  
-
-
2 General safety information  
Read and follow these instructions. They contain  
safety advice which is important for safe and  
problem-free installation and operation. Always  
read and follow the safety advice.  
-
Alcoholic beverages or other containers  
holding alcohol must always be tightly sealed  
for storage purposes. Any leaking alcohol can  
be ignited by electrical components  
Tipover hazard:  
-
Dangers for the user:  
Do not stand or climb on the base, drawers,  
doors, etc. This applies in particular to chil-  
-
This appliance can be operated by children 8  
years and older as well as by persons with  
reduced physical, sensory or mental capabili-  
ties or lack of experience and knowledge if  
they are supervised or have been instructed in  
the safe use of the appliance and understand  
the associated risks. Children must not play  
with the appliance. Cleaning and user mainte-  
nance must not be performed by children  
unless they are supervised.  
dren.  
Risk of food poisoning:  
-
Do not consume food that has passed its best  
before date.  
Danger of frostbite, feelings of numbness  
and pain:  
-
Avoid continued skin contact with the cold  
surfaces or chilled/frozen food or adopt protec-  
tive measures, e. g. use gloves. Do not  
consume ice cream (especially sherbets) and  
ice cubes immediately when they are too cold.  
-
When disconnecting the appliance from the  
outlet, always take hold of the plug. Do not pull  
on the cable.  
Risk of injury and damage:  
-
-
-
Disconnect the power plug or switch off the  
power if a fault occurs.  
Hot steam may lead to injuries. Do not use any  
electrical heating or steam cleaning equip-  
ment, naked flames or defrosting sprays for  
defrosting  
Do not damage the mains power line. Do not  
operate the appliance from a defective mains  
power line.  
-
Repairs, work on the appliance and replace-  
ment of the power cord should only be carried  
out by the customer service department.  
Only install, connect and dispose of the appli-  
ance in accordance with the instructions.  
Only operate the appliance after it has been  
installed.  
-
Do not remove ice with sharp objects  
Follow the specific instructions in the other  
sections:  
-
-
-
DANGER  
indicates a hazardous situation,  
which if not avoided, will result in  
death or serious injury.  
WARNING indicates a hazardous situation,  
which if not avoided, could result in  
death or serious injury.  
Please keep the instructions and pass them on  
to any future owner.  
4
* Depending on model and options  
 
Controls and displays  
4 Start-up  
CAUTION  
NOTICE  
indicates a hazardous situation,  
which if not avoided, will result in  
minor or moderate injury.  
4.1 Transporting the appliance  
indicates a hazardous situation,  
which if not avoided, could result in  
damage to property.  
CAUTION  
Risk of injury or damage if incorrectly transported.  
Note  
indicates useful advice and tips.  
Transport the appliance in its packaging.  
Transport the appliance upright.  
u
u
u
Do not move the appliance on your own.  
3 Controls and displays  
4.2 Setting up the appliance  
3.1 Operating and control elements  
WARNING  
Risk of fire due to moisture!  
If live parts or the power cord get wet, this can cause a  
short circuit.  
The appliance is designed for use in enclosed spaces.  
Do not operate the appliance in open space or in damp  
areas or where there is spray.  
u
Fig. 2  
(1) Alarm button  
(8) Child safety symbol  
(9) Fridge compartment  
Down  
Only operate the appliance after it has been installed.  
u
(2) SuperFrost button  
(3) Freezer compartment (10)Fridge compartment Up  
On/Off button  
WARNING  
(4) Freezer compartment (11)Fridge compartment  
Risk of fire due to short circuit.  
Down button  
On/Off button  
If the power cable or plug of the appliance or another  
appliance and the back of the appliance touch each other  
the power cable or plug will be damaged by the vibrations  
of the appliance which could lead to a short circuit.  
(5) Freezer compartment (12)SuperCool button  
Up button  
(6) Freezer compartment (13)Ventilation button  
temperature display  
Install the appliance so that it does not touch any plugs  
or power cables.  
u
(7) Fridge compartment  
temperature display  
Do not connect the appliance or other appliances to the  
sockets on the back of the appliance.  
u
3.2 Temperature display  
The following is displayed in normal operation:  
WARNING  
the highest freezer temperature  
the average fridge temperature  
-
-
Danger of fire and damage!  
Do not place devices that give off heat, e.g. micro-  
waves, toasters, etc. on the appliance.  
u
The freezer compartment temperature display is flashing:  
the temperature setting has been changed  
after switch-on the temperature is not yet cold enough  
the temperature has risen several degrees  
-
-
-
CAUTION  
Risk of personal injury!  
Dashes are shown on the display:  
the freezer temperature is above 32 °F (0 °C).  
Have two people move this appliance into place.  
u
-
The following displays indicate malfunction. Possible  
causes and corrective actions: (see Troubleshooting).  
-
-
nA  
F0 through F5  
* Depending on model and options  
5
 
Start-up  
NOTICE  
4.3 Disposal of packaging  
Risk of damage caused by condensation  
Installing the appliance next to any other refrigerator or  
freezer can cause condensation or damage to the  
Liebherr appliance.  
WARNING  
Danger of suffocation from packaging materials and films!  
Do not install this appliance next to any other refriger-  
ator or freezer except another Liebherr model. Liebherr  
models are designed to allow side-by-side installation.  
They are equipped with a heating system to eliminate  
condensation when refrigerators or freezers are  
installed side-by-side.  
u
Do not allow children to play with packaging materials.  
u
The packaging is made from recyclable materials:  
Corrugated card/cardboard  
-
-
-
-
-
Parts made of foamed polystyrene  
Films and bags from polyethylene  
Packing bands from polypropylene  
Wood frame nailed together with a polyethylene  
window*  
NOTICE  
Risk of damage for the finished floor surface!  
Protect the finished floor surface before you uncrate the  
unit.  
u
Take the packaging material to an official collection  
point.  
u
Verify that:  
The floor under the appliance is flat and level.  
q
q
4.4 Connecting the appliance  
The floor can support the appliance's weight plus  
approximately 1200 pounds (544 kg) of food weight.  
The appliance is not placed in direct sunlight or near  
the stove, range top, radiators and similar heat  
sources.  
q
WARNING  
Electrical shock hazard!  
Start-up should only take place once the appliance has  
been installed according to these instructions.  
Electrically ground appliance.  
u
The kitchen cabinet that the appliance is installed in is  
shimmed to the floor level if the floor heights are not  
equal.  
q
u
u
u
Do not ground to a gas pipe.  
Cutout dimensions are accurate.  
q
q
q
Check with a qualified electrician if you are not sure the  
appliance is properly grounded.  
Electrical outlet is in correct location.  
The air flow is not restricted. Air flow must be provided  
for the appliance to operate properly. The factory air  
vents provide 31 square inches (200 cm2) of air flow  
per appliance. If you are replacing the air vents with an  
overlay, the air flow must be the same or greater than  
the factory air vents.  
Do not have a fuse in the neutral or grounding circuit.  
Do not use an extension cord, power bar or a multiple  
socket adapter.  
u
u
Do not use a power cord that is frayed or damaged.  
u
Examine the unit and packaging for shipping damage.  
Contact the carrier immediately if you suspect there is  
any damage.  
u
u
u
u
WARNING  
Electrical shock hazard!  
This appliance is equipped with a three-prong (grounding)  
polarized plug for your protection against possible shock  
hazards. Electrical Grounding Required.  
Note the type (model, number), index, appliance/serial  
number, date of purchase and where purchased  
Do not remove the round grounding prong from the  
u
Remove anything attached to the rear or side walls of  
appliance that would prevent proper installation or  
impede proper ventilation.  
plug.  
Use only an grounded adapter.  
u
Unscrew the red transport  
Wait 1 hour after installation before you plug in the  
appliance. This allows the refrigerant and system lubri-  
cation to reach equilibrium.  
-
lock. Close the vacated  
retaining hole using the  
stopper (70).  
Make sure incoming voltage is the same as the appli-  
ance rating. A 110-120 Volt, 60 Hz, 15 Amp electrical  
supply (20 Amp for side-by-side installations) circuit  
that is controlled by a circuit breaker or fuse is required.  
We recommend using a dedicated circuit for this appli-  
ance to prevent electrical overload.  
-
-
-
Note  
Clean the appliance (see 6.2) .  
u
Follow all Federal, State and local electrical, fire and  
building codes and ordinances when installing the  
receptacle and / or the appliance.  
If the appliance is set up in humid areas, condensation  
may build on the outside of the appliance.  
In some communities, a wall switch is required to turn  
power to the appliance ON and OFF.  
-
Always ensure proper ventilation.  
u
6
* Depending on model and options  
 
Operation  
To reduce the risk of fire, electric shock, or personal  
injury, installation work and electrical wiring must be  
done by a qualified electrician in accordance with all  
applicable codes and standards, including fire-rated  
construction.  
Using Freezer compartment Up button  
u
-
Fig. 2 (5)/ Freezer compartment Down button  
Fig. 2 (4) select °.  
To confirm: Briefly press SuperFrost button  
Fig. 2 (2).  
u
u
The Power Plug must be easily accessible so that the  
appliance can be disconnected from the mains quickly  
in an emergency. It must not be behind the back of the  
appliance.  
Using Freezer compartment Up button  
Fig. 2 (5)/ Freezer compartment Down button  
Fig. 2 (4) select °F or °C.  
-
-
To confirm: Briefly press SuperFrost button  
Fig. 2 (2).  
u
u
The top of the electric outlet must be located within  
82-5/8 in. (2100 mm) from the top of the base in the  
cabinet.  
To exit setting mode: Press Freezer compartment  
On/Off button Fig. 2 (3).  
-or-  
Wait 5 minutes.  
u
w
4.5 Switching on the appliance  
The temperature is again displayed in the temperature  
display.  
Note  
To switch on the entire appliance, only the freezer  
compartment needs to be switched on.  
u
5.2 Brightness of the temperature  
display  
Switch on the appliance 2 hours before loading  
with frozen food for the first time.  
You can adapt the brightness of the temperature display  
Do not load frozen foods until the temperature  
to the light conditions in the room in which it is installed.  
display reads 0 °F (-18 °C).  
5.2.1 Setting the brightness  
The brightness can be set between h1 (minimum lumi-  
nosity) and h5 (maximum luminosity).  
4.5.1 Switching on the freezer compartment  
Open the door.  
u
u
w
Press On/Off button, freezer compartment Fig. 2 (3).  
The refrigerator compartment temperature display indi-  
cates the set temperature.  
To activate setting mode: Press SuperFrost button  
Fig. 2 (2) for about 5 seconds.  
u
w
w
u
c is shown on the display.  
The temperature display for the freezer compartment  
will flash until the temperature is cold enough. If the  
temperature is greater than 32 °F (0 °C), flashing  
dashes will appear; if the temperature is lower than this,  
the set temperature will flash on the display.  
w
The SuperFrost button will flash.  
Press Freezer compartment Up button Fig. 2 (5) or  
Freezer compartment Down button Fig. 2 (4) to select h.  
To confirm: Briefly press SuperFrost button Fig. 2 (2).  
To set the display brighter: Press Freezer  
compartment Up button Fig. 2 (5).  
u
u
4.5.2 Switching on the fridge compartment  
To set the display darker: Press Freezer  
compartment Down button Fig. 2 (4).  
u
Open the door.  
u
u
w
w
Press Fridge compartment On/Off button Fig. 2 (11).  
The interior light comes on when the door is opened.  
The temperature display flashes. The fridge compart-  
ment is switched on.  
To confirm: Press SuperFrost button Fig. 2 (2).  
The brightness is set to the new value.  
u
w
u
To deactivate setting mode: Press Freezer compart-  
ment On/Off button Fig. 2 (3).  
-or-  
Wait 5 minutes.  
u
w
5 Operation  
The temperature is again displayed in the temperature  
display.  
5.1 Temperature display unit  
The temperature display can be changed from °F to °C.  
5.3 Child-proof lock  
You can use the child-proof lock to lock the  
buttons. This means that children cannot acci-  
dentally switch off the appliance when playing.  
5.1.1 To change the unit  
Activate setting mode: Press SuperFrost button  
u
Fig. 2 (2) for about 5 seconds.  
The SuperFrost button Fig. 2 (2) will flash.  
c is displayed in the temperature display.  
w
w
5.3.1 Switching on the child-proof lock  
To activate setting mode: Press SuperFrost button  
u
Fig. 2 (2) for about 5 seconds.  
w
w
c is shown on the display.  
The SuperFrost button will flash.  
* Depending on model and options  
7
 
Operation  
Press the SuperFrost button Fig. 2 (2) briefly to confirm.  
To switch on: Using Freezer compartment Up  
button Fig. 2 (5) or Freezer compartment Down  
button Fig. 2 (4) select c1.  
u
u
5.5.1 Switching off the temperature alarm  
The acoustic warning can be switched off. When the  
temperature is cold enough again, the alarm function is  
active again.  
To switch off: Using Freezer compartment Up  
button Fig. 2 (5) or Freezer compartment Down  
button Fig. 2 (4) select c0.  
u
Press Alarm button Fig. 2 (1).  
The acoustic warning ceases.  
u
w
To confirm: Press SuperFrost button Fig. 2 (2).  
If the Child-proof lock symbol Fig. 2 (8) lights up, the  
child-proof lock is switched on.  
u
w
5.6 Fridge compartment  
The natural circulation of air in the refrigerator compart-  
ment results in zones with differing temperatures. It is  
coldest directly above the vegetable drawers and at the  
rear wall. It is warmest at the top front of the compartment  
and in the door.  
To deactivate setting mode: Press Freezer compart-  
ment On/Off button Fig. 2 (3).  
u
-or-  
Wait for 5 minutes.  
u
w
The temperature is again displayed in the temperature  
display.  
5.6.1 Arranging Food  
5.4 Door alarm  
If the door is open for longer than 180 seconds,  
the acoustic warning sounds.  
The acoustic warning stops automatically when  
the door is closed.  
5.4.1 Switching off the door alarm  
The acoustic warning can be switched off when the door  
is open. The acoustic warning remains switched off as  
long as the door is open. When the door is closed, the  
alarm function is active again.  
Fig. 3  
5.6.2 Refrigerating food  
Note  
Press Alarm button Fig. 2 (1).  
The door alarm stops.  
u
w
Do not load the door with more than 35 lbs (16 kg) of  
food.  
u
5.5 Temperature alarm  
Note  
If the freezer temperature is not cold enough,  
Insufficient ventilation results in an increase in energy  
consumption and reduction of the refrigerating perform-  
ance.  
the audible warning sounds.  
At the same time, the temperature display will  
flash.  
Never block the air slits in the fan.  
u
Use recyclable plastic, metal, aluminum and glass  
containers and cling film to wrap foods.  
u
The cause of a temperature being too high may be:  
Hot fresh food was placed in the appliance.  
When sorting and removing food from the appliance,  
too much warm ambient air got in.  
-
Always use closed containers for liquids and for food  
that may give off or be tainted by odor or flavor transfer  
or cover them.  
u
u
-
The power was cut off for a while.  
-
-
Foods which give off a large amount of ethylene gas  
and those that are sensitive to this gas, such as fruit,  
vegetables and salad, should always be separated or  
wrapped so as not to reduce the storage life; for  
example, do not store tomatoes together with kiwi fruits  
or cabbage.  
The appliance is faulty.  
The audible warning automatically ceases, and the  
temperature display stops flashing when the temperature  
is cold enough again.  
If the alarm status remains: (see Troubleshooting).  
Use the front floor area of the fridge compartment only  
to set down food to be refrigerated temporarily, e.g.,  
when rearranging or sorting the contents of the fridge.  
Do not leave the food there, as it may be pushed back  
or tipped over when the door is closed.  
u
u
Note  
If the temperature is not cold enough, food may spoil.  
Check the quality of the food. Do not consume spoiled  
food.  
u
Do not store food too close together to enable sufficient  
air circulation.  
8
* Depending on model and options  
 
Operation  
To ensure bottles do not tip over: move the bottle  
holder.  
at high room temperatures (from approx. 95 °F  
(35 °C) )  
u
-
-
in the case of high humidity  
5.6.3 Setting the temperature  
The temperature depends on the following factors:  
Re-circulated air cooling has a somewhat higher energy  
consumption. To save energy, the fan automatically  
switches off when the door is open.  
the number of times the door is opened  
the room temperature of the installation location  
the type, temperature and amount of food.  
-
-
-
Switching on the fan  
Briefly press Ventilation button Fig. 2 (13).  
The Ventilation button lights up.  
The fan is switched on.  
u
w
w
The temperature can be set from 46 °F (7 °C) to (2 °C),  
(5 °C) is recommended.  
To set a higher temperature: press the Fridge compart-  
ment Up button Fig. 2 (10).  
u
u
w
u
u
w
w
Switching the fan off (default)  
Briefly press Ventilation button Fig. 2 (13).  
The Ventilation button lights up.  
The fan is switched off.  
u
w
w
To set a lower temperature: press the Fridge compart-  
ment Down button Fig. 2 (9).  
When pressed once the previously set fridge compart-  
ment temperature display value will flash.  
To change the temperature in 1 °F (1 °C) increments:  
briefly press the button.  
5.6.6 Shelves  
Repositioning the shelves  
To change the temperature continuously: hold the  
button down.  
The value is displayed flashing during the setting oper-  
ation.  
CAUTION  
Danger of lacerations!  
The actual temperature is displayed about 5 seconds  
after the last press of a button. The temperature slowly  
adjusts to the new value.  
The storage shelf can shatter if dropped or mishandled.  
You could cut yourself on the pieces of broken glass.  
Only remove storage shelves when there is nothing on  
them.  
u
5.6.4 SuperCool  
Extension stops secure the shelves against being acci-  
dentally pulled out.  
With SuperCool you switch to the highest cooling  
performance to reach lower cooling tempera-  
tures. Use SuperCool to rapidly cool large quan-  
tities of food.  
When SuperCool is activated, the fan* runs. The appli-  
ance operates with maximum refrigeration. The noise of  
the refrigeration unit may be temporarily louder as a  
result.  
Lift the shelf and pull out  
forward.  
u
Insert the shelf with the  
raised edge to the back  
pointing upwards.  
u
This prevents food from  
contacting and freezing to  
the back wall.  
w
SuperCool will use more energy than normal operation.  
Cooling with SuperCool  
Briefly press the SuperCool button Fig. 2 (12).  
The SuperCool button Fig. 2 (12) lights up.  
The cooling temperature drops to the coldest value.  
SuperCool is switched on.  
u
w
w
To dismantle shelves  
The shelves can be  
u
SuperCool automatically switches itself off after about  
6-12 hours. The appliance returns to work in the  
energy-saving normal mode.  
w
dismantled for cleaning.  
To prematurely switch off SuperCool  
Briefly press the SuperCool button Fig. 2 (12).  
The SuperCool button Fig. 2 (12) goes out.  
SuperCool is switched off.  
u
w
w
5.6.7 Using the split shelf  
CAUTION  
5.6.5 Fan  
Danger of lacerations!  
The fan allows you to rapidly cool large amounts  
of fresh food or to achieve a relatively even  
distribution of temperature across all the storage  
levels.  
The storage shelf can shatter if dropped or mishandled.  
You could cut yourself on the pieces of broken glass.  
Only remove storage shelves when there is nothing on  
them.  
u
Re-circulated air cooling is advisable:  
* Depending on model and options  
9
 
Operation  
5.7 Freezer compartment  
You can store frozen food, make ice cubes and freeze  
fresh food in the freezer compartment.  
5.7.1 Freezing food  
Each drawer can hold up to 55.12 lbs (25 kg) of frozen  
food; each plate can hold up to 77.16 lbs (35 kg).  
After the door is closed, a vacuum is created. After  
closing the door, wait about 1 minute, then the door is  
easier to open.  
Fig. 4  
The glass shelf with stop face (2) has to be at the back.  
u
5.6.8 Door racks  
CAUTION  
Note  
There is a risk of injury from pieces of broken glass.  
Bottles and cans containing drinks can split or crack when  
frozen. This applies in particular to carbonated drinks.  
Do not load the door with more than 35 lbs (16 kg) of  
food.  
u
Do not freeze bottles and cans containing drinks.  
u
Repositioning the door racks  
So that the food is rapidly frozen through to the core, do  
not exceed the following quantities per pack:  
- fruit, vegetables up to 2.2 lb (1 kg)  
- meat up to 5.51 lbs (2.5 kg)  
Pack the food in portions in freezer bags, reusable  
plastic, metal or aluminum containers.  
u
5.7.2 Defrosting food  
Push rack up, pull forward, and reinsert in the reverse  
order.  
u
- in the fridge compartment  
- at room temperature  
- in the microwave  
Always take the butter and cheese  
compartment out together with the  
cover.  
- in the oven/fan oven  
To remove the cover: press one  
side of the butter and cheese  
compartment outwards until the  
hinge pin of the cover is released,  
then remove the cover sideways.  
u
WARNING  
Danger of food poisoning!  
Do not re-freeze defrosted food.  
u
Only take out the amount of food that is required. Use  
defrosted food as quickly as possible.  
u
To dismantle door racks  
5.7.3 Setting the temperature in the freezer  
compartment  
The appliance is set as standard for normal operation.  
The temperature can be set between 8 °F (-14 °C) and  
The door racks can be dismantled for cleaning.  
u
-14 °F (-26 °C), 0 °F (-18 °C) is recommended.  
To set a higher temperature: press the Freezer  
compartment Up button Fig. 2 (5).  
u
u
w
5.6.9 Removing the bottle holder  
To set a lower temperature: press the Freezer compart-  
ment Down button Fig. 2 (4).  
Remove the bottle holder as per the  
u
illustration.  
When the button is pressed for the first time, the  
previous value is indicated on the freezer compartment  
temperature display.  
Always take hold of the bottle  
holder by the plastic part.  
u
To change the temperature in 1 °F (1 °C) increments:  
briefly press the button.  
u
-or-  
To change the temperature continuously: hold the  
u
button down.  
10  
* Depending on model and options  
 
Operation  
The value is displayed flashing during the setting oper-  
ation.  
w
w
The actual temperature is displayed about 5 seconds  
after the last press of a button. The temperature slowly  
adjusts to the new setting.  
5.7.4 SuperFrost  
To store frozen food directly on the shelves: pull the  
drawer forward and lift it out.  
u
With this function you can rapidly freeze fresh  
food through to the core. The appliance works  
with maximum refrigerating performance. The  
sound of the refrigeration unit may be tempora-  
rily louder as a result.  
Depending on how much fresh food is to be frozen you  
must switch SuperFrost on in advance - for a small  
amount of food to be frozen, about 6 hours, for the  
maximum amount about 24 hours before putting the food  
in.  
5.7.6 Shelves  
To remove shelf: lift it at the front and  
u
pull out forward.  
To reinsert shelf: simply slide it in as  
far as it will go.  
u
Package the food and place it inside across as wide an  
area as possible. Do not bring food that is to be frozen  
into contact with products that are already frozen to  
prevent these items from starting to thaw.  
5.7.7 VarioSpace  
In addition to the drawers, you  
can also take out the shelves.  
This gives you space for large  
frozen items. Poultry, meat,  
large joints of game and tall  
bakery items can be frozen  
and then presented whole.  
You do not need to switch SuperFrost on in the following  
cases:  
when placing frozen food in the freezer  
when freezing up to about 2 kg of fresh food a day  
-
-
Freezing with SuperFrost  
Each drawer can hold up to  
55.12 lbs (25 kg) of frozen  
food; each plate can hold  
up to 77.16 lbs (35 kg).  
u
Briefly press the SuperFrost button Fig. 2 (2) once.  
The SuperFrost button Fig. 2 (2) lights up.  
The freezing temperature drops and the appliance  
operates at its maximum refrigeration power rating.  
When a small amount of food is to be frozen.  
Wait approx. 6 hrs.  
u
w
w
u
u
Place packaged food in the upper drawers.  
When the maximum amount of food is to be frozen.  
Wait approx. 24 hrs.  
5.7.8 Info system*  
u
w
SuperFrost is automatically switched off. At the earliest  
after 30 hours, at the latest after 65 hours, depending  
on the quantity placed inside the appliance.  
The SuperFrost button Fig. 2 (2) goes out when the  
freezing process is complete.  
w
w
Fig. 5  
The appliance returns to work in the energy-saving  
normal mode.  
(1) Ready meals, ice  
cream  
(4) Sausages, bread  
(2) Pork, fish  
(5) Game, mushrooms  
5.7.5 Drawers  
(3) Fruit, vegetables  
(6) Poultry, beef/veal  
Note  
The numbers indicate the storage time in months for  
different types of frozen foods. The storage times given  
are guidelines.  
Insufficient ventilation results in an increase in energy  
consumption and reduction of the refrigerating perform-  
ance.  
For appliances with NoFrost:  
5.7.9 IceMaker*  
Leave the bottom drawer in the appliance.  
u
u
The IceMaker is in the top drawer. The drawer is labeled  
Never block the air slits in the fan on the rear wall.  
“IceMaker”.  
Make sure that the following conditions are fulfilled:  
The appliance is level.  
-
-
-
-
The appliance is connected to the electricity supply.  
The freezer compartment is switched on.  
The minimum freezer temperature is 14 °F (-10 °C).  
* Depending on model and options  
11  
 
 
Maintenance  
The IceMaker is connected to the water supply.  
-
This ensures that no water or ice remains in the  
IceMaker.  
w
All air was bled from the waterline before starting the  
icemaker. The icemaker will only work if there is no air  
in the waterline.  
-
6 Maintenance  
Switching on the IceMaker*  
6.1 Defrosting with NoFrost  
The NoFrost system defrosts the appliance automatically.  
Fridge compartment:  
The defrosted water is evaporated by the heat of the  
compressor. Drops of water on the back wall are a func-  
tional feature and completely normal.  
Fig. 6  
Clean the drain opening regularly so that the defrosted  
u
Pull out the drawer.  
u
u
water can flow away (see 6.2) .  
Freezer compartment:  
Press On/Off button Fig. 6 (1) so that the LED Fig. 6 (2)  
lights up.  
Push in the drawer.  
u
The moisture condenses on the evaporator and is periodi-  
cally defrosted and evaporated.  
Note  
The IceMaker only produces ice cubes when the  
The appliance does not need to be defrosted manually.  
u
u
drawer is completely closed.  
6.2 Cleaning the appliance  
Producing ice cubes*  
The production capacity depends on the freezer tempera-  
ture. The lower the temperature, the more ice cubes can  
be produced in a certain period.  
WARNING  
Danger of electric shock.  
Unplug refrigerator or disconnect power.  
u
The production capacity is 90- 100 ice cubes in 24 hours  
at a freezing temperature of 0 °F (-18 °C).  
To have the maximum capacity of approx. 130 ice cubes  
in 24 hours, activate the SuperFrost Function. Be aware  
that this increases the energy consumption because the  
compressor will run constantly.  
The ice cubes fall out of the IceMaker into the drawer.  
When the ice cubes reach a certain height in the drawer,  
no more ice cubes can be produced. The IceMaker will  
not fill the drawer to the top.  
If large quantities of ice cubes are required, the complete  
IceMaker drawer can be swapped with the neighboring  
drawer. When you close the drawer, the IceMaker auto-  
matically restarts production.  
WARNING  
Risk of injury or damage due to hot steam.  
Hot steam can cause scalding/burns and damage to  
surfaces.  
Do not use steam cleaners.  
u
NOTICE  
Incorrect cleaning damages the appliance.  
Do not use concentrated cleaning agents.  
Do not use steel wool or sponges that scour or scratch.  
Do not use caustic or abrasive cleaning materials or  
those containing sand, chloride, chemicals or acids.  
Do not use chemical solvents.  
u
u
u
When the IceMaker is switched on for the first time, it may  
u
u
take up to 24 hours for the first ice cubes to be produced.  
Do not damage or remove the rating plate on the inside  
of the appliance. It is vital for the customer service  
department.  
Note  
Particles may accumulate in the IceMaker or water line  
the first time the appliance is used or after an extended  
period out of service.  
Do not pull off, kink or damage any cables or other  
components.  
u
u
u
u
Do not let cleaning water get into the drain gutter, the  
ventilation grille and electrical parts.  
To achieve this, do not consume or use the ice cubes  
that are produced within 24 hours.  
u
Use soft cleaning cloths and a multi-purpose cleaning  
agent with a neutral pH value.  
Switching off the IceMaker*  
Only use food-compatible cleaning and care agents  
inside the appliance.  
If ice cubes are not required, the IceMaker can be  
switched off independently of the freezer compartment.  
Empty the appliance.  
When the IceMaker is switched off, the drawer of the  
IceMaker can also be used for freezing and storing food.  
u
u
Disconnect the power plug.  
Press the On/Off button for about 1 second until the  
LED goes out.  
u
Clean the IceMaker.  
u
12  
* Depending on model and options  
 
 
Maintenance  
Clean the plastic surfaces, outside and inside, by  
hand using lukewarm water and a little dish washing  
liquid.  
max. 25 W (25 W)  
120 V  
u
u
q
q
q
q
Bulb fitting: E14  
To clean the drain opening:  
Current and voltage must agree with the details on the  
rating plate.  
Remove deposits with  
a
thin  
instrument, e.g. a cotton bud.  
WARNING  
Danger of electric shock.  
Most of the equipment parts can be dismantled for  
cleaning: see the respective chapter.  
u
u
u
First, remove the plug or switch off the fuse.  
u
Clean the roller plates for the vegetable trays in the  
dishwasher.  
CAUTION  
Clean the other fittings by hand using lukewarm water  
Cutting hazard!  
and a little dish washing liquid.  
To prevent possible injury due to broken glass, use  
hand protection when replacing the interior light.  
u
After cleaning:  
Wipe the appliance and accessories dry.  
Connect the appliance and switch it on again.  
Switch on SuperFrost (see 5.7.4) .  
u
u
u
Take hold of the light cover at  
the top and bottom Fig. 8 (1).  
.Unclip light cover Fig. 8 (2) at  
the back and unhook.  
u
u
u
When the temperature is sufficiently cold:  
put the food back in the appliance.  
u
Replace the light bulb Fig. 8 (3).  
6.3 Cleaning the IceMaker*  
When turning it, use a little more  
force to overcome the static fric-  
tion of the seal. Make sure the  
seal sits cleanly in the light  
socket.  
Fig. 8  
Hook the cover in again at the  
back and clip in at the sides.  
u
6.5 Customer service  
First check whether you can remedy the fault yourself  
(see Troubleshooting). If this is not the case, please  
contact a qualified service provider.  
Fig. 7  
The IceMaker must be switched on.  
Pull out the drawer and take out the ice.  
Clean the drawer with warm water and mild dish deter-  
gent.  
u
u
WARNING  
With the drawer pulled out, press and hold the On/Off  
button (for about 10 seconds).  
u
w
w
Risk of injury from repairs by non-professionals.  
Repairs and work on the appliance and the power  
supply cable not described in the Manual (see Mainte-  
nance) should only be carried out by a qualified service  
provider.  
u
After about 1 second the LED goes out, the IceMaker is  
switched off.  
After about 10 seconds the LED flashes for about 60  
seconds.  
Push the drawer in while the LED is flashing.  
The ice tray of the IceMaker rotates and tilts.  
Take out the drawer.  
u
w
u
u
Read the appliance  
designation  
u
Fig. 9 (1), service no.  
Fig. 9 (2) and serial  
no. Fig. 9 (3) from the  
rating plate. The  
Clean the ice tray with warm water. If necessary, use a  
mild dish detergent. Then rinse.  
To switch the IceMaker on again:  
Press the ON/OFF button until the LED lights up, then  
push the drawer in.  
u
w
u
rating  
plate  
is  
located inside the  
appliance on the  
left-hand side.  
The IceMaker starts to produce ice cubes.  
If dish detergent was used:  
Throw out the first three batches of ice cubes to get rid  
of any soapy residues.  
Fig. 9  
Notify a qualified service provider, specifying the fault,  
appliance designation Fig. 9 (1), service no. Fig. 9 (2)  
and serial Fig. 9 (3) no.  
u
w
6.4 Replacing the interior light*  
This will help us to provide you with a faster and more  
accurate service.  
Light bulb data  
* Depending on model and options  
13  
 
Troubleshooting  
Keep the appliance closed until the Customer Service  
engineer arrives.  
u
Date of purchase:  
Where purchased:  
_____________________  
_____________________  
The food will stay cool longer.  
w
u
Disconnect the power plug (do not pull on the power  
cord to do this) or switch off the fuse.  
7 Troubleshooting  
6.6 Appliance Information  
Your appliance is designed and manufactured for reliable  
operation and a long lifespan. If a malfunction nonethe-  
less occurs during operation, please determine if the  
malfunction is due to an operating error. If a service call  
determines operator error, you will be charged for the  
costs incurred, even during the warranty period. You may  
be able to rectify the following problems yourself:  
Make a note of this information when the appliance is  
installed:  
Type Designation:  
_____________________  
_____________________  
_____________________  
Service Number:  
Appliance / Serial Number:  
Problem  
Possible Cause  
Correction  
The appliance is not switched on.  
Switch on the appliance.  
Check the power plug.  
u
u
The appliance  
does not work.  
The power plug is not properly  
inserted in the wall socket.  
The fuse in the wall socket is not OK.  
Power failure  
Check the fuse.  
u
Keep the appliance closed.  
u
u
Protect the food: place dry ice on top of the food or  
use an alternate freezer, if the power failure persists  
for some time.  
Do not re-freeze defrosted food.  
u
u
When less refrigeration is required,  
the speed-controlled compressor  
switches to a low speed. Although  
the running time is increased as a  
result, energy is saved.  
This is normal in energy-saving models.  
The compressor  
runs for a long  
time.  
SuperFrost function is activated.  
The compressor runs long to rapidly freeze food.  
This is normal.  
u
u
u
SuperCool function is activated.  
The compressor runs long to rapidly cool food. This  
is normal.  
The inverter is equipped wth a diag-  
nostic LED.  
The flashing is normal.  
A LED at the  
lower rear of the  
appliance (for  
the compressor)  
flashes regularly  
every 15  
seconds*.  
The different speed levels of speed-  
controlled* compressors can cause  
them to generate various noises  
during operation.  
These noises are normal.  
The sound is normal.  
u
u
Noises are too  
loud.  
This sound comes from the refrig-  
erant flowing in the refrigeration  
circuit.  
A gurgling  
sound  
14  
* Depending on model and options  
 
 
Troubleshooting  
Problem  
Possible Cause  
Correction  
The sound always occurs when the  
refrigeration unit (the motor) auto-  
matically switches on or off.  
The sound is normal.  
u
A faint clicking  
sound  
The refrigeration increases automati-  
cally when the SuperFrost function is  
activated, fresh food has just been  
placed in the appliance or the door  
has been left open for a while.  
The sound is normal.  
The sound is normal.  
u
A hum. It is  
briefly a little  
louder when the  
refrigeration unit  
(the motor)  
switches on.  
The refrigeration increases automati-  
cally when the SuperCool function is  
activated, fresh food has just been  
placed in the appliance or the door  
has been left open for a while.  
u
The ambient temperature is too high.  
u
u
The sound occurs as a result of fan  
air flow.  
The sound is normal.  
A low hum  
The sound is caused by the soft stop  
mechanism.  
The sound is normal.  
u
u
Flow noise on  
the soft stop  
mechanism.*  
The temperature There is a fault.  
display indi-  
Contact the customer service department (see Main-  
tenance).  
cates: F0 to F5.  
The temperature The freezer temperature rose too  
Press the Alarm button Fig. 2 (1).  
u
w
display indi-  
high during the last hours or days  
due to power failure or power inter-  
ruption. When the power interruption  
is over, the appliance will continue to  
operate at the last temperature  
setting.  
The warmest temperature reached during the power  
failure is displayed in the temperature display for  
about 60 seconds. Then the electronics again indi-  
cate the current freezer temperature  
cates: nA.  
To delete the display of the warmest temperature  
ahead of time: Press the Alarm button Fig. 2 (1).  
Check the quality of the food. Do not consume  
spoiled food. Do not re-freeze defrosted food.  
u
u
The heat of the refrigerant circuit is  
used to prevent condensate from  
forming.  
This is normal.  
u
The outside  
surfaces of the  
appliance are  
hot*.  
The appliance and therefore the  
IceMaker are not connected.  
Connect the appliance (see Start-up).  
u
The IceMaker  
cannot be  
switched on.*  
The IceMaker is not switched on.  
Switch the IceMaker on.  
Close the drawer properly.  
u
u
The IceMaker is  
not making ice  
cubes.*  
The drawer of the IceMaker is not  
properly closed.  
The water connection is not open.  
Open the water connection.  
u
u
The water supply to the IceMaker  
was interrupted.  
Check the connection to the water supply (see the  
Assembly Instructions, Connecting the Water  
Supply).*  
Check the pipes and hoses (see the Assembly  
Instructions, Connecting the Water Supply).*  
u
* Depending on model and options  
15  
 
Troubleshooting  
Problem  
Possible Cause  
Correction  
There is a blocked filter at the end of  
the water supply hose or at the  
connecting part on the machine.  
Clean the filters.  
u
u
u
The waterline was not bled of all air  
during installation  
Please contact your qualified installation plumber to  
ensure the above criteria is met before calling for  
service.  
The door of the appliance is not  
closed properly.  
Close the appliance door.  
The temperature  
is not cold  
enough.  
Insufficient ventilation.  
Clear ventilation grilles.  
u
u
u
The ambient temperature is too high.  
The appliance was opened too  
frequently or for too long.  
Wait to see whether the required temperature resets  
itself by itself. If not, contact the customer service  
department (see Maintenance).  
Too much fresh food was placed  
inside without SuperFrost.  
u
The temperature is incorrectly set.  
Set to a colder temperature and check after 24 hours  
Change location of appliance or the heat source.  
u
u
The appliance is too near to a heat  
source (stove, heater etc).  
The freezer temperature display will  
only show temperatures that are  
below freezing.  
When initially starting the appliance it will not be  
below freezing. It will take three to five hours  
(depending on ambient conditions) for freezing  
temperatures to be achieved and thus displayed  
numerically.  
u
Display show  
two dashes (“-  
-”).  
The freezer temperature has risen  
above zero degrees due to a power  
failure or power interruption.  
See also “Power failure” and “nA”  
u
The appliance is not switched on.  
Switch on the appliance.  
u
u
The interior light  
is not on.  
The door was open for longer than  
15 minutes.  
The interior light automatically switches itself off if  
the door has been open for about 15 minutes.  
The LED interior light is faulty or the  
cover is damaged*  
WARNING*  
Risk of injury from electrical shock.  
Live parts are under the cover.  
The LED interior light should only be replaced or  
repaired by the Customer Service department or by  
engineers trained to do so.  
u
WARNING*  
Risk of injury from LED lamp!  
The lighting intensity of the LED light complies with laser  
class 1/1M.  
If the cover is faulty:  
Do not gaze directly at this lighting unit with optical  
lenses while very close to the light source. This can  
cause damage to your eyes.  
u
16  
* Depending on model and options  
 
Putting appliance out of service  
Problem  
Possible Cause  
Correction  
If the interior light is not on but the  
temperature display is lit, the bulb is  
faulty.*  
Change the bulb (see Maintenance).*  
u
Put the IceMaker in the cleaning position (see Mainte-  
nance).  
u
8 Putting appliance out of  
service  
Disconnect the power plug.  
u
u
Clean the appliance (see 6.2) .  
8.1 Vacation Tips  
Leave the door open to prevent bad smells.  
u
Short vacations: If you will be away for less than four  
weeks  
Use all perishables.  
9 Disposing of the appliance  
u
Freeze other items.  
u
u
u
u
Follow the local regulations for the disposal of appliances.  
Old appliances can be dangerous. Contact the local  
refuse collection department for additional information.  
Turn off the refrigerator compartment.  
Turn off the icemaker.*  
Shut down the water supply to the icemaker.*  
Long vacations: If you will be away for a month or more  
Remove all food from the appliance.  
Turn OFF the appliance.  
u
u
u
u
w
u
u
DANGER  
There is a risk of suffocation.  
Clean the appliance (see 6.2) .  
Children playing can shut themselves in and suffocate.  
Leave the door open to prevent unpleasant odors.  
This will also keep mold from building up.  
Turn off the icemaker.*  
Take the door(s) off.  
u
u
u
Remove the drawers.  
Leave the storage shelves in the appliance so that chil-  
dren cannot easily climb into the appliance.  
Shut off the water supply to the icemaker.*  
8.2 Switching off the appliance  
WARNING  
Note  
Danger of electric shock.  
To switch off the entire appliance, only the freezer  
compartment needs to be switched off.  
u
Cut off the plug from the power cord and discard.  
Cut off the power cord from the discarded appliance.  
Dispose of separately from the appliance.  
u
u
8.2.1 Switching off the freezer compartment  
Ensure during and after disposal that the appliance isn't  
stored in the vicinity of gasoline or other flammable vapors  
and liquids.  
When disposing of the appliance, ensure that the refriger-  
ation circuit is not damaged to prevent uncontrolled  
escape of the refrigerant it contains (data on type plate)  
and oil.  
Press and hold down the freezer compart-  
ment On/Off button Fig. 2 (3) for approx. 2  
seconds.  
u
The temperature displays are dark. The  
appliance is switched off.  
w
8.2.2 Switching off the fridge compartment  
Note  
10 Liebherr Warranty Plan  
The fridge compartment can be switched off independ-  
ently of the freezer.  
u
FULL TWO YEAR WARRANTY - For two years from the  
date of original purchase, your Liebherr warranty covers  
all parts and labor to repair or replace any part of the  
product which proves to be defective in materials or work-  
manship.  
Press and hold down the chiller compartment On/Off  
button Fig. 2 (11) for approx. 2 seconds.  
u
w
The fridge compartment temperature display Fig. 2 (7) is  
dark. The fridge compartment is switched off.  
FULL FIVE YEAR WARRANTY - For five years from the  
date of original purchase, your Liebherr warranty covers  
all parts and labor to repair or replace any components  
that prove to be defective in materials or workmanship in  
the sealed system. The “Sealed System” means only the  
8.3 Decommissioning *  
Empty the appliance.  
u
* Depending on model and options  
17  
 
Liebherr Warranty Plan  
compressor, condenser, evaporator, drier and all  
connecting tubing.  
LIMITED 6TH THROUGH 12TH YEAR WARRANTY -  
From the 6th through 12th year from the date of original  
purchase, your Liebherr warranty covers all parts that  
prove to be defective in materials or workmanship in the  
Sealed System (parts only).  
TERMS APPLICABLE TO EACH WARRANTY  
All service provided by Liebherr under the warranty must  
be performed by authorized Liebherr service representa-  
tives, unless otherwise specified by Liebherr. Service will  
be provided in the home during normal business hours.  
This warranty applies only to products installed for normal  
residential use. Details regarding  
a
non-residential  
warranty are available on request.  
The warranty applies only to products installed in any one  
of the fifty states of the United States or the District of  
Columbia. The warranty does not cover any parts or labor  
to correct any defect caused by negligence, accident or  
improper use, maintenance, installation, service or repair,  
including but not limited to improper removal and reinstal-  
lation of the condensing unit.  
THE WARRANTIES DESCRIBED ABOVE ARE MADE  
EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES,  
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED  
WARRANTY OF MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE, AND OF ANY OTHER  
OBLIGATION OR LIABILITY ON THE PART OF  
LIEBHERR. IN NO EVENT SHALL LIEBHERR BE  
LIABLE FOR SPECIAL, INCIDENTAL OR CONSE-  
QUENTIAL DAMAGES ARISING FROM THE BREACH  
OF THESE WARRANTIES OR ANY OTHER WARRAN-  
TIES, WHETHER EXPRESS, IMPLIED OR STATU-  
TORY.  
Some states do not allow the exclusion or limitation of  
incidental or consequential damages so the above limita-  
tion or exclusion may not apply to you. This warranty  
gives you specific legal rights and you may also have  
other legal rights which very from state to state.  
To receive parts and/or service and the name of the  
Liebherr authorized service representative nearest you,  
contact your Liebherr dealer or distributor or contact the  
Liebherr designated national service provider:  
in the US: [email protected] or call 1-866-  
LIEBHER (1-866-543-2437).  
(1-888-543-2437).  
18  
* Depending on model and options  
 
Liebherr Warranty Plan  
* Depending on model and options  
19  
 
For Service in the U.S.:  
Liebherr Service Center  
15545 N. 77th Street  
Scottsdale, AZ 85260  
Phone: (480) 998-0141  
Fax: (480) 998-7877  
Toll Free: 1-866-LIEBHER or 1-866-543-2437  
For Service in Canada:  
EURO-PARTS CANADA  
39822 Belgrave Road,  
BELGRAVE, Ontario, N0G 1E0  
Phone: (519) 357-3320  
Fax: (519) 357-1326  
Toll Free: 1-888-LIEBHER or 1-888-543-2437  
Part No. 7082698 - 00  
 

Lenoxx Electronics Cassette Player 820M User Manual
LG Electronics CRT Television 29FX6ALX User Manual
Lincoln Welder AC 225C User Manual
Magnavox Home Theater System FW62C User Manual
Makita Saw 4341FCT User Manual
Mamp;S Systems Stereo System DMC1HC User Manual
Maytag Washer MAV7600 User Manual
Mazda Automobile 2008 Tribute HEV User Manual
Meade Telescope ETX 90EC User Manual
Memorex Music Mixer MMP8620 User Manual