Linak Network Router MJB User Manual

U S E R M A N U A L  
MJB - Gateway  
To learn more about LINAK please visit:  
W W W. L I N A K . C O M  
 
Contents  
Preface .................................................................................................................................................................. 4  
Important information ........................................................................................................................................ 5  
Safety instructions............................................................................................................................................... 5  
Residual risk ......................................................................................................................................................... 6  
Before installation, reinstallation or troubleshooting ...................................................................................... 7  
Before start-up..................................................................................................................................................... 7  
During operation ................................................................................................................................................. 7  
Information on the MJB ...................................................................................................................................... 7  
Repairs .................................................................................................................................................................. 8  
Misc. on the MJB system .................................................................................................................................... 9  
Warranty and service life.................................................................................................................................. 9  
Maintenance ................................................................................................................................................... 9  
MJB - GATEWAY variant .................................................................................................................................... 10  
Standard functionality.................................................................................................................................... 10  
Relay 1 and 2 ................................................................................................................................................ 10  
Features......................................................................................................................................................... 11  
Options (speciale article)................................................................................................................................ 11  
Usage............................................................................................................................................................ 11  
Precautions......................................................................................................................................................... 13  
IP Protection degree .......................................................................................................................................... 15  
Environmental conditions ................................................................................................................................. 16  
Modular plug with wide and narrow slit......................................................................................................... 17  
Keys to symbols ................................................................................................................................................. 18  
Drawing appendix ............................................................................................................................................. 20  
Addresses ........................................................................................................................................................ 24  
3
 
Preface  
We are delighted that you have chosen a product from LINAK®.  
LINAK systems are high-tech products based on many years of experience in the  
manufacture and development of actuators, electric control boxes, controls and  
chargers.  
This User Manual will tell you how to install, use and maintain your LINAK  
equipment.  
We are sure that your LINAK system will give you many years of problem-free  
operation. Before our products leave the factory they undergo full function and  
quality testing. Should you nevertheless experience problems with your systems,  
you are always welcome to contact your local dealer.  
LINAK subsidiaries and some distributors situated all over the world have authorised  
service centres, which are always ready to help you.  
LINAK provides a warranty on all its products. This warranty, however, is subject to  
correct use in accordance with the specifications, maintenance being done correctly  
and any repairs being carried out at a service centre, which is authorised to repair  
LINAK products.  
Changes in installation and use of LINAK systems can affect their operation and  
durability. The products are not to be opened by unauthorised personnel. The User  
Manual has been written on the basis of our present technical knowledge. We are  
constantly working on updating the information and we therefore reserve the right  
to carry out technical modifications.  
LINAK A/S  
4
 
Important information  
Description of the various signs used in this manual.  
Warning!  
Failure to comply with these instructions may result in accidents involving  
serious personal injury.  
Failing to follow these instructions can result in the product being damaged or  
destroyed.  
Safety instructions  
Safe use of the system is possible only when the operating instructions are read  
completely and the instructions contained are strictly observed.  
Failure to comply with instructions marked with the”NOTE” symbol may result in  
serious damage to the system or one of its components.  
Persons who do not have the necessary experience or knowledge of the product/  
products must not use the product/ products. Besides, persons with reduced  
physical or mental abilities must not use the product/products, unless they are under  
surveillance or they have been thoroughly instructed in the use of the apparatus by a  
person who is responsible for the safety of these persons.  
Moreover, children must be under surveillance to ensure that they do not play with  
the product.  
It is important for everyone who is to connect, install, or use the systems to  
have the necessary information and access to this User Manual.  
If there is visible damage to the product it must not be installed.  
The appliance is not intended for use by young children or infirm persons  
without supervision.  
Young children should be supervised to ensure that they do not play with the  
appliance.  
5
 
Residual risk  
Some of the products contains software based components. LINAK has made  
various possible efforts to assure that the software is free of errors and that  
the software has been developed according to the rules of IEC 60601-1-4  
(software in Medical products). That involves Risk Analysis which shows a small  
residual risk for unwanted/unintended movement of actuators under specific  
conditions.  
According to the above rules it must be informed and if necessary considered  
in the Risk analysis of the final application - More details to residual risk can be  
provided by LINAK if necessary.  
Warning!  
The plastic parts in the system cannot tolerate cutting oil.  
Warning!  
LINAKs actuators and electronics are not constructed for use within the  
following fields:  
• Planes and other aircrafts  
• Explosive environments  
• Nuclear power generation  
Warning!  
If faults are observed, the products must be replaced.  
Warning!  
Never spray directly on the products with a high-pressure cleaner.  
Warning!  
Always insure that the patient is accessible in case of emergency.  
Warning!  
Cables must be secured safely so that persons cannot get trapped in it.  
Warning!  
Always use locking mechanism and O-ring  
Warning!  
Sockets not used must be fitted with blind plugs to ensure IP degree  
The LINAK products cannot tolerate the influence of strong solvents, basic or  
alkaline liquids.  
6
 
Before installation, re-installation, or troubleshooting  
• Stop the application  
• Switch off the power supply and pull out the mains plug.  
• Relieve the application of any loads, which may be released during the work.  
Before start-up  
• Make sure that the system has been installed as instructed in the User Manual.  
• Make sure that the voltage of the control box is correct before the system is  
connected to the mains.  
• System connection. The individual parts must be connected before the control  
box is connected to the mains.  
During operation  
• Ensure that the cables are not damaged.  
• Unplug the mains cable on mobile equipment before it is moved.  
Information on the MJB  
The MJB Modular Junction Box is designed for use together with OpenBus™  
control boxes.  
The MJB makes it possible to connect multiple handsets, attendant controls or it  
makes it possible to use the MJB as a control unit for 3rd party products as Out of  
Bed detection, USB charger, Under Bed Light etc.  
LINAK A/S delivers only the OpenBus system and is not responsible for any  
products other than LINAK products (i.e. products from 3rd party suppliers) or  
the compliance of such products with the LINAK OpenBusTM system.  
7
 
Repairs  
In order to avoid the risk of malfunction, all repairs must only be carried out  
by authorised LINAK workshops or repairers, as special tools must be used and  
special gaskets must be fitted. Products under warranty must also be returned to  
authorised LINAK workshops.  
Warning!  
If any of the LINAK products are opened, there will be a risk of subsequent  
malfunction.  
Disposal of LINAK’s products  
LINAKs products may be disposed of, possibly by dividing them into different waste  
groups for recycling or combustion.  
We recommend that our product is disassembled as much as possible at the  
disposal and that you try to recycle it. As an example of main groups within sorting  
of waste we can mention the following:  
Metal, plastic, cable scrap, combustible material and collection for recoverable  
resources.  
Some of these main groups can be sub-divided into groups e.g. metal can be  
divided into iron, stainless steel and aluminium and alloy steel. Plastic can e.g. be  
divided into ABS, PA, PE and PP.  
The MJB can be disassembled and sorted into the following recycling groups:  
Component  
Recycling group  
Plastic housing – Plastic recycling or combustion  
Cable – Cable scrap or combustion  
PC-board – Electronics scrap  
MJB  
By now all our casted plastic units are provided with an interior code for plastic  
types and fibre contents, if any.  
8
 
Misc. on the MJB system  
Warranty and service life  
The LINAK warranty covers manufacturing defects in the products, starting from  
the date of manufacture. There is 18 months’ warranty for MEDLINE and CARELINE  
products. The warranty is limited to the value of the LINAK product.  
LINAKs guarantee is only valid so far as the products have been used and  
maintained correctly and has not been tampered with. Furthermore, the products  
must not be exposed to violent treatment. In the event of this, the warranty will be  
ineffective / invalid. LINAKs warranty is only valid if the system is unopened and has  
been used correctly.  
All LINAK products are designed to have an optimum service life as a matter of  
course, but the expected service life in a specific application is very dependent on  
how the products are used.  
Maintenance  
• The LINAK products must be cleaned at regular intervals to remove dust and dirt  
and inspected for mechanical damage, wear and breaks.  
• The LINAK MJB is a closed unit and requires no internal maintenance.  
• IPX6 is waterproof.  
• Make sure that the plugs in the MJB are correctly fitted with O-rings before  
washing.  
• Electronics must be inspected at attachment points, wires, cabinet, and plugs.  
• Inspect the connections, cables, cabinet and plugs, and check for correct  
functioning.  
9
 
MJB - GATEWAY variant, 504-01 & 504-02 :  
The MJB is a simple gateway interface, which can connect the bed to the infrastructure  
of the hospital or nursing homes. The Gateway can be used in combination with an  
Out of Bed Sensor, which makes it possible to indicate if the patient leaves the bed.  
The Gateway can also be used as a service/nurse call system. Please note it is only to be  
used as a guided system, not for emergency issues.  
Port 5: Relay connetions  
Relay 1:  
- Pin 1  
- Pin 2  
- Pin 3  
NC  
Port 5  
NO  
NC  
Relay 2:  
- Pin 4  
- Pin 5  
- Pin 6  
NO  
Port 1  
OpenBus connetion  
Standard functionality:  
The MJB - Gateway consist of two relays, which are connected through Port 5 on the  
MJB. This can be made with the special cable 0964140 (Modular plug - Open end)  
There are as standard 2 configurations, 504-01 and 504-02, see description on the  
next pages.  
Relay1: NC (normally closed) = Pin 2 + Pin 1 / NO (normally open) = Pin 2 + Pin 3  
Relay2: NC (normally closed) = Pin 5 + Pin 4 / NO (normally open) = Pin 5 + Pin 6  
Relay 1 is NO when connected to the mains and NC when no mains, this means  
the relay is “active”, when connected to the mains (closed loop). The Closed Loop  
principal is to ensure that an alarm is sent if power is missing on the bed. When the  
mains is disconnected (power is missing), the relay will go from NO to NC, which will  
automatically result in an alarm (status indicator) on the OpenBus™.  
Relay 1 can be activated via the patient control (Key1 / Key4) or the attendant control  
(Key2 / Key3). When a key is activated, the relay will switch state from NO to NC for 2  
seconds. After 2 seconds the relay will automatically change state from NC to NO.  
The status of the relay is indicated on the OpenBus™ and can be used for switching  
on an LED.  
Relay 2 is as default NC, with or without mains, (Open Loop)  
Relay 2 can be activated via the patient control (Key 1) or the attendant control (Key 2  
/ Key 3).  
When the relay is activated, it will switch from NC to NO for 2 seconds. After 2  
seconds the relay will automatically change state from NO to NC.  
The status of the relay is indicated on the OpenBus™ and can be used for switching  
on an LED.  
10  
 
By using the variant 504-02 relay 2 will be controlled by the MJB variant 505/506 with  
switch input.  
Alarm 1 = Switch input S2 (OoBD alarm) / Alarm 2 = Switch input S1  
When using this combination, is it important to have the MJB 505/506 connected to  
the system all the time. If it is not connected, the Gateway MJB will see it as an alarm  
and the relay will be activated. The Gateway MJB is “scanning” the OpenBus™ system  
every minute for an alarm.  
Features:  
• Add-on value for hospital & care bed  
• Compact and functional design which allows easy mounting  
• 2 connections, Port1 OpenBus™ connection / Port 5 Gateway  
• Colour: Light grey RAL 7035  
• Protection class IPX6  
• Connection to OpenBus™ control box via modular plug cable, 6 wires  
• Modular plug to Open end, see precautions.  
Options (special article):  
• Customised SW:  
It is possible to define the OpenBus™ signals to be used for activating the relays  
and / or change the alarm indicator, so that it fits to the customers system. Please  
contact your Sales Engineer at LINAK A/S for further information.  
Usage:  
• Compatible with all LINAK OpenBus™ Control Boxes, light & full  
Contact rating :  
• Max continuous current :  
• Maximum switching voltage :  
• Maximum switching capacity :  
• Contact resistance :  
= 1A  
= 125V (DC) / 125V (AC)  
= 24W (DC) / 62,5VA (AC)  
< 100 m  
Current consumption:  
• V bus 8V :  
= 9 mA  
• V permanent 40V :  
= 14 mA  
• Approvals: LINAK and UL International DEMKO A/S are currently in the process of  
certifying the MJBX0X, re. UL60601 and EN60601-1  
11  
 
Relay 1  
CB power mode  
Alarm level  
Alarm  
Relay state  
NC\*  
Mains unplugged, CB is in power down or the OpenBus™ is not  
running (Clock/ data is missing)  
On mains or battery at “wake up”  
Bed Alarm\**  
No Alarm  
NC  
NO  
Relay 2  
CB power mode  
Alarm level  
No Alarm  
Relay state  
NC  
Mains unplugged or CB is in power down  
On mains or battery at “wake up”  
Bed Alarm\**  
No Alarm  
NO  
NC  
\* When the mains is unplugged or CB is in power down will the relay shift to NC state and generate  
alarm.  
\** Alarm generated by nurse call or bed alarms  
Example of closed loop:  
3rd. party site  
In this state no Alarm  
Example of Open Loop:  
3rd. party site  
In this state no Alarm  
12  
 
Precautions:  
• Always use locking mechanism and O-ring  
• Sockets not used must be fitted with blind plugs to ensure IP Degree  
• When using the modular plug with open end, is it up to the customer to maintain  
the IP degree.  
• If the MJB – Gateway is used as open loop, there is a risk of not sending an alarm,  
when no mains are connected. The MJB – Gateway will only send an alarm if  
mains is missing, when using a Closed Loop (see functionality description.)  
CB Power mode  
Gateway  
Function ok  
No function  
Function ok  
• When the Gateway is used on a system with battery,  
the gateway functionality will follow the power  
down mode of the control box, see table  
On mains  
Power down  
On battery  
“Wake Up”  
• The MJB – Gateway is not to be used as safety, it is only to be used as a guided  
system.  
• It is important to test the specified alarms is working in the correct way, before  
sending the system to the end user.  
• Do not use 2 MJB variants with same device ID on the OpenBus™. This will cause  
conflicts and the SDT is not able to identify the different products attached.  
• Before the final functional test in the production, it is important that the system  
is re-powered. This is to ensure that all items have been detected on the  
OpenBus™.  
• We recommend the end user to make a regular test procedure in order to  
prevent failures and hazardous situations on the system, e.g. defective OOB  
sensor, squeezed cables. The MJB is not able to detect defective 3rd. party products.  
• LINAK only takes responsibility for LINAK products, not 3rd. party products.  
Please pay attention to the “Patient Environment” Clause 3.79 - EN60601-1 3rd  
edition: Any volume in which contact can occur between a patient and parts of the  
medical equipment or between a patient and other persons touching parts of the  
equipment. Justified practice here is 1.5 m. This volume must be subject to the Risk  
Analysis.  
It is important to inform the customer about this.  
• There can be a risk of conflict with other OpenBus™ accessories, such as HB, ACP,  
etc. It is therefore recommended to make a system/bit overview.  
13  
 
Cable ordering nos.:  
Modular plug – open end:  
0964140-3000  
Please note, the slit is placed on the opposite  
side of the modular plug.  
This is to ensure that the cable is only being  
used for the Gateway MJB.  
14  
 
IP Protection degree:  
All LINAK products can be cleaned as follow according to their IP protection, which  
is stated on the product label.  
The IP code specifies the degrees of protection provided by the enclosures. Only  
the protection against ingress of water (second characteristic numeral) is specified,  
ingress of solid foreign objects (first characteristic numeral) is not specified and  
therefore replaced by the letter X in the code.  
IP Protection  
Cleaning instrucions  
IPX0  
Clean with a damp cloth  
IPX1  
IPX2  
IPX3  
IPX4  
IPX5  
IPX6  
Clean with a damp cloth  
Clean with a damp cloth  
Clean with a damp cloth  
Clean with a damp cloth  
Wash with a brush and water, but not water under pressure  
X Wash with a brush and water. The water can be under pressure, but the system  
o
must not be hosed down directly with a high-pressure cleaner. Max. 20 C  
IPX6 Washable Clean by the use of water tunnels  
The materials are resistant to the majority of cleaners and disinfectants used in the  
hospital and nursing home sector.  
Cleaning with a steam cleaner, for example, is not permitted, as it will not be  
possible to maintain a minimum distance of 300 mm from the electrical parts.  
The following directions regarding cleaners and disinfectants must be  
complied with:  
• They must not be highly alkaline or acidic (pH value 6-8).  
• They must not contain caustic agents.  
• Their contents must not be able to change the structure of the surface or  
adhesion of the plastic.  
• They must not break down grease.  
The following disinfectants/detergents are recommended:  
• Neodischer Dekonta, dosage 1-3%, made by CHEMISCHE FABRIK Dr. WEIGERT,  
• CCOTRADE RW, dosage 0.5%, made by CCOTRADE GmbH.  
15  
 
Warning!  
The systems must not be sprayed directly with a high-pressure cleaner.  
Warning!  
Interconnecting cables must remain plugged in during cleaning to prevent  
the ingress of water.  
Precaution!  
When cleaned, water must never be sprayed upwards from underneath the  
bed, because it may enter the cable outlet.  
Environmental conditions:  
Environmental conditions  
Operating:  
Temperature  
5°C to 40°C  
Relative humidity  
Atmospheric pressure  
20% to 90% @ 30°C – not condensing  
700 to 1060 hPa  
Storage:  
Temperature  
-10°C to +50°C  
Relative humidity  
Atmospheric pressure  
20% to 90% @ 30°C – not condensing  
700 to 1060 hPa  
Valid where nothing otherwise is stated under the specific products in a later section.  
16  
 
Modular plug with wide slit  
To be used with LINAK products.  
Can be connected to all ports in the MJB,  
both ports with narrow and wide slit.  
Modular plug with narrow slit  
To be used with 3rd party products.  
Can only be connected to ports in the MJB with  
narrow slit. This is to prevent 3rd party products  
to interfere with the OpenBusTM connections.  
17  
 
Key to symbols  
The following symbols are used on the label on the LINAK products.  
Type B equipment, as per EN 60601-1  
Protection against contact/foreign  
matter (first character) and water  
(second character) as per EN60529  
Lock function  
Release function  
Charge indicator  
IPXX  
Class 2 equipment  
Safety switch/enable button  
For indoor use  
Double insulated transformer  
Protective earth  
Alternating Current  
Direct current  
Attention, consult accompanying  
documents  
18  
 
Demko approval  
Fimko approval  
UL file number  
UL file number  
UL file number  
CSA  
Australian approval mark  
PSE-Mark  
Australian approval mark  
Recognised - Component Mark  
Product with a thermofuse  
Canadian  
Recognised - Component Mark  
For indoor use (House).  
Recognised  
Component Mark for Canada  
and the United States  
Safety isolating transformer.  
T-Mark  
Electronics scrap  
RW-Tüv approval  
Equipment Kl.2 (Double square)  
Patient part of type B (Mand)  
Patient part of type BF  
Tüv.Produkt Service  
TÜVRheinland  
Earth protection  
Equipment class1.  
ETL  
Earth  
C-ETL  
CE Mark  
C-TICK  
LGA  
UL Listing Mark  
C-UL Listing Mark  
C-UL US Listing Mark  
UL Listing Mark  
19  
 
DRAWING APPENDIX  
MJB - Modular Junction Box  
MJB  
20  
 
LINAK APPLICATION POLICY  
The purpose of the application policy is to define areas of responsibilities in relation  
to applying a LINAK product defined as hardware, software, technical advice, etc.  
related to an existing or new customer application.  
LINAK products as defined above are applicable for a wide range of applications  
within the Care and Health, Comfort furniture, Desk and Industry areas. Yet, LINAK  
cannot know all the conditions under which LINAK products will be installed, used,  
and operated, as each individual application is unique.  
The suitability and functionality of the LINAK product and its performance under  
varying conditions (application, vibration, load, humidity, temperature, frequency,  
etc.) can only be verified by testing, and shall ultimately be the responsibility of the  
LINAK customer using any LINAK product.  
It is also the responsibility of the LINAK customer to make and supply a  
comprehensive user manual of the application.  
LINAK shall be responsible solely that the LINAK products comply with the  
specifications set out by LINAK and it shall be the responsibility of the LINAK  
customer to ensure that the specific LINAK product can be used for the application  
in question.  
21  
 
22  
 
23  
 
FACTORIES  
NETHERLANDS  
IRAN  
CHINA  
LINAK Actuator-Systems B.V.  
Bod Inc.  
LINAK (Shenzhen) Actuator Systems, Ltd.  
.
.
.
Phone: +31 76 5 42 44 40 Fax: +31 76 5 42 61 10  
Phone: +98 2188998635 - 6 Fax: +98 2188954481  
Phone: +86 755 8610 6656 Fax: +86 755 8610 6990  
.
.
.
NEW ZEALAND  
LINAK New Zealand Ltd.  
Phone: +64 9580 2071 Fax: +64 9580 2072  
MEXICO  
ILSA S.A. de C.V.  
Phone: +[52] (55) 5388-3960 Fax: +[52] (55) 5388-3966  
DENMARK  
LINAK A/S Group Headquarters Guderup  
Phone: +45 73 15 15 15 Fax: +45 74 45 80 48  
Fax (Sales): +45 73 15 16 13  
.
.
.
.
.
.
.
NORWAY  
PERU  
LINAK Norge AS  
Phone: +47 32 82 90 90 Fax: +47 32 82 90 98  
PERCY MARTIN DEL AGUILA UBILLUS  
Phone: +51 99- 883-9879  
SLOVAKIA  
LINAK Slovakia s.r.o.  
Phone: +421 517563 414 Fax: +421 517563 410  
.
.
.
RUSSIAN FEDERATION  
.
POLAND  
LINAK Polska  
000 FAM  
.
Phone: +7 812 3319333 Fax: +7 812 3271454  
USA  
LINAK U.S. Inc.  
North and South American Headquarters  
Phone: +1 502 253 5595 Fax: +1 502 253 5596  
.
.
Phone: +48 (22) 500 28 74 Fax: +48 (22) 500 28 75  
.
SINGAPORE  
.
.
SPAIN  
LINAK Actuadores, S.L.u  
Phone: +34 93 588 27 77 Fax: +34 93 588 27 85  
SERVO DYNAMICS PTE. Ltd.  
.
Phone: +65 6844 0288 Fax: +65 6844 0070  
.
.
.
SUBSIDIARIES  
AUSTRALIA  
LINAK Australia Pty. Ltd  
Phone: +61 3 8796 9777 Fax: +61 3 8796 9778  
SOUTH AFRICA  
SWEDEN  
LINAK Scandinavia AB  
Phone: +46 8 732 20 00 Fax: +46 8 732 20 50  
Industrial Specialised Applications CC  
Phone: +27 11 312 2292 or +27 11 2077600  
Fax: +27 11 315 6999  
.
.
.
.
.
AUSTRIA  
LINAK GmbH - Austria  
Phone: +43 (0) 2266 61 9 62 Fax: +43 (0) 2266 63 2 99  
SWITZERLAND  
LINAK AG  
Phone: +41 43 388 31 88 Fax: +41 43 388 31 87  
SOUTH KOREA  
UNITEK ENG.  
Phone: +82 2 567 0888 Fax: +82 2 3453 1177  
.
.
.
.
.
.
BELGIUM & LUXEMBOURG  
LINAK Actuator-Systems NV/SA  
Phone: +32 (0)9 230 01 09 Fax: +32 (0)9 230 88 80  
TAIWAN  
UNITED ARAB EMIRATES  
LINAK A/S Taiwan Representative Office  
Phone: +886 2 250 80296 Fax: +886 2 2508 3604  
Mechatronics  
Phone.: +971 4 267 4311 Fax: +971 4 267 4312  
.
.
.
.
.
BRAZIL  
TURKEY  
LINAK DO BRASIL COMÉRCIO DE ATUADORES LTDA.  
Phone: +55 (11) 2832-7070 Fax: +55 (11) 2832-7060  
LINAK A/S Turkey Representative Office  
Phone: +90 312 4726338-59 Fax: +90 312 4726635  
.
.
.
For contact details on other countries please visit  
.
CANADA  
LINAK Canada Inc.  
Phone: +1 502 253 5595 Fax: +1 905 821 4281  
UNITED KINGDOM  
LINAK UK Limited  
Phone: +44(0)121 544 2211 Fax: +44(0)121 544 2552  
LINAK INTERNATIONAL  
.
Fax: +45 74 45 90 10  
.
.
.
.
CZECH REPUBLIC  
LINAK C&S S.R.O.  
Phone: +420581741814 Fax: +420581702452  
DISTRIBUTORS  
ARGENTINA  
NOVOTEC ARGENTINA SRL  
.
.
.
Phone: +[54] (11) 4303-8900/89 Fax: +[54] (11) 4032-0184  
DENMARK  
LINAK DANMARK A/S  
Phone: +45 86 80 36 11 Fax: +45 86 82 90 51  
.
.
COLOMBIA  
MEM Ltda  
FINLAND  
LINAK OY  
.
Phone: +[57] (1) 334-7666 Fax: +[57] (1) 282-1684  
.
Phone: +358 10 841 8700 Fax: +358 10 841 8729  
.
INDONESIA  
FRANCE  
PT. HIMALAYA EVEREST JAYA  
Phone: +6 221 544 8956/65 Fax: +6 221 619 4658/1925  
LINAK FRANCE E.U.R.L  
.
.
Phone: +33 (0)2 4136 3434 Fax: +33 (0)2 4136 3500  
.
.
GERMANY  
LINAK GmbH  
Phone: +49 6043 9655 0 Fax: +49 6043 9655 60  
.
.
INDIA  
LINAK A/S Asian Representative Office  
Phone: +91 120 4797013  
Terms of use  
.
The user is responsible for determining the suitability of  
LINAK products for specific application. LINAK takes great  
care in providing accurate and up-to-date information on  
its products.  
IRELAND  
LINAK UK Limited  
Phone: +44(0)121 544 2211 Fax: +44(0)121 544 2552  
.
.
However, due to continuous development in order to  
improve its products, LINAK products are subject to frequent  
modifications and changes without prior notice. Therefore,  
LINAK cannot guarantee the correct and actual status of said  
information on its products.  
While LINAK uses its best efforts to fulfil orders, LINAK  
cannot, for the same reasons as mentioned above, guarantee  
the availability of any particular product. Therefore, LINAK  
reserves the right to discontinue the sale of any product  
displayed on its website or listed in its catalogues or other  
written material drawn up by LINAK.  
ITALY  
LINAK ITALIA S.r.l.  
Phone: +39 02 48 46 33 66 Fax: +39 02 48 46 82 52  
.
.
JAPAN  
LINAK K.K.  
.
Phone: +81 45 533 0802 Fax: +81 45 533 0803  
.
MALAYSIA  
LINAK A/S Asian Representative Office  
Phone: +60 4 210 6500 Fax: +60 4 226 8901  
.
All sales are subject to the Standard Terms of Sale and  
Delivery for LINAK. For a copy hereof, please contact LINAK.  
.
 

Lego Games 10665 User Manual
Lenovo Laptop B470E User Manual
LightSpeed Technologies Stereo Amplifier 705iR User Manual
Magnavox Network Router 26MF605W User Manual
Makita Impact Driver BTW120SA User Manual
Mark Feldstein Assoc Home Theater System SP4080 User Manual
Marshall electronic Flat Panel Television V R82DP HDSDI User Manual
Melissa Dishwasher 658005 User Manual
Melissa Toaster 243 011 User Manual
Mellerware Iron 23300A User Manual