AUTOMATED SOLUTIONS
™
eCell
The eCell welding robot cell is a two-fixed table workstation designed for small to
medium sized parts that can be welded without reorientation. The layout is
optimized to maximize the work envelope of the robot, and is ideal for flexible
manufacturing systems allowing manufacturers to install multiple robots in close
proximity to save valuable floor space.
Shipped completely assembled and ready for immediate installation and production,
the eCell is designed to be an attractive and low cost alternative to labor intensive
arc welding.
Processes
Description
3
60
DC
CV-MIG Pulsed-MIG Flux-Cored Metal-Cored
CV
Output
Input
Hz
PHASE
Advantage Lincoln
Unit Includes
®
®
• Simple to set-up, easy to operate.
• Fanuc ArcMate 100iBe 6-axis robot
®
• Power Wave 355M power source
• Power Feed wire drive system (4-Roll)
• 360 Amp Air-Cooled Welding Torch
• Collision Guard - Torch Protection Software
• (2) - 24 X 24 in. (0.6 X 0.6 m) Precision Machined Tooling Plates
• Four side fork-lift access.
®
• Pre-wired with one disconnect switch and fuse protection.
• Integrated user interface.
• 15 User inputs/outputs available.
• 115V 15 Amp auxiliary power receptacle.
• High speed digital communication featuring Arclink™.
• Complete metal surround flash and safety barrier.
• Multi-voltage, offering 230/460/575 Volts, 3-Phase.
• Work Zone: H x W x D = 41 x 30 x 39 in. (1.0 x 0.8 x 1.0 m)
Recommended Options
• Power Ream™ (Torch Reaming Station with Sprayer/Clipper)
• Fume Exhaust Environmental System
• Password Protection Software
• TorchMate 2 – Automatic Tool Center Point Adjustment Software
• PCMCIA 64MB Memory Card
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
®
• AccuTrak Payoff Kit
• Simple Fixturing Required
• ANSI/RIA 15.06-99, and compliant design.
Order
AD1222-10 eCell
TECHNICAL SPECIFICATIONS
Power Source
Current/Voltage/
Duty Cycle
Dimensions
H x W x D
inches (mm)
Net
Weight
lbs. (kg)
Product
Name
Product
Number
Input
Power
Feeder/Torch
Robot
eCell
AD1222-10
230/460/575/3/60
(20KVA Max)
Power Wave 355M
350A/34V/60%
(300A/32V/100%)
4-Roll Feeder
360 Amp A/C Torch
ArcMate
100iBe
(6 axis)
80x90x60
(2032x2286x1524)
2200
(998)
(100% CO )
2
Publication E10.120 8/07
|