Metra Electronics Car Stereo System 99 7009 User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-7009  
APPLICATIONS  
Mitsubishi Endeavor  
2004-2010  
99-7009  
KIT FEATURES  
s DIN Head Unit Provisions  
s ISO DIN Head Unit Provisions  
KIT COMPONENTS  
A) Radio Housing  
s
B) ISO Brackets  
s
C) Trim Plate  
C
A
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)  
Harness:  
s ꢀꢁꢂꢀꢁꢁꢃ ꢂ -ITSUBISHI HARNESS ꢃꢄꢄꢅꢂUP  
s -)4/ꢂꢁꢃ ꢂ -ITSUBISHI AMPLIFIED )NTERFACE ꢅꢁꢁꢆꢂUP  
Antenna Adapter:  
s .OT REQUIRED  
OOLS REQUIRED:  
T
Phillips Screwdriver s Socket Wrench  
1-800-221-0932  
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION  
 
99-7009  
2004-2010 MITSUBISHI ENDEAVOR  
A
Disconnect the negative battery terminal  
to prevent an accidental short circuit.  
1
2
Unsnap and remove entire panel sur-  
rounding radio and A/C controls.  
(Figure A)  
3
Remove (1) 10MM nut from the rear support  
on the top left of radio on cross bar behind  
dash. (FIGURE B)  
B
4
5
Remove (3) Phillips screws to remove  
factory radio chassis (Figure C)  
Remove (4) Phillips screws from the pock-  
et at the bottom of the radio and A/C panel  
and remove the pocket. (This is where the  
C
99-7009 will be mounted.) (Figure D)  
D
1
 
..",%%.  
9>Cꢀ=ZVYꢀJc^iꢀEgdk^h^dc  
5SING THE FACTORY HARDWAREꢂ MOUNT  
THE ꢃꢃꢁꢄꢅꢅꢃ IN THE LOCATION WHERE  
THE FACTORY POCKET RESIDEDꢀ  
3LIDE THE $). CAGE INTO THE 2ADIO  
(OUSING AND SECURE BY BENDING  
THE METAL LOCKING TABS DOWNꢀ  
3LIDE THE AFTERꢁMARKET HEAD UNIT  
INTO THE CAGE AND SECUREꢀ 3NAP  
TRIM PLATE INTO THE RADIO HOUSINGꢀ  
'
 
..",%%.  
>HDꢀ9>Cꢀ=:69ꢀJC>IꢀEGDK>H>DC  
-OUNT THE )3/ "RACKETS TO THE HEAD  
UNIT WITH THE SCREWS SUPPLIED WITH  
THE UNITꢀ  
3LIDE THE HEAD UNIT INTO THE RADIO  
OPENING UNTIL THE SIDE CLIPS ENGAGEꢀ  
3NAP THE 4RIM PLATE INTO THE 2ADIO  
(OUSINGꢀ  
(
 
..",%%.  
!
"
!
"
#
$
3TRIP WIRE ENDS BACK ꢄꢇꢀꢈ  
4WIST ENDS TOGETHER  
3OLDER  
#
$
4APE  
,OCATE THE FACTORY WIRING HARNESS IN THE DASHꢀ  
-ETRA RECOMMENDS USING THE PROPER MATING  
ADAPTER AND MAKING THE CONNECTIONS AS  
SHOWNꢀ ꢆ)SOLATE AND INDIVIDUALLY TAPE OFF THE  
ENDS OF ANY UNUSED WIRES TO PREVENT ELECTRICAL  
SHORT CIRCUIT 3EE FIGURE !ꢀ  
2EꢁCONNECT THE NEGATIVE BATTERY TERMINAL AND TEST  
THE UNIT FOR PROPER OPERATIONꢀ  
2EASSEMBLE RADIO AND DASH ASSEMBLIES IN  
REVERSE ORDER OF DISASSEMBLYꢀ  
)
 
..",%%.  
*
 
INST997009  
1-800-221-0932  
Rev. 04-26-10 © COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION INST99-7009  
 

Kustom Musical Instrument Amplifier KG100FX212 User Manual
Lantronix Server EDS MD16 User Manual
Life Fitness Home Gym 415101 User Manual
Makita Cordless Saw 4304 User Manual
Manhattan Computer Products Cable Box 179119 User Manual
Manitowoc Ice Ice Maker 7628973 User Manual
Martin Audio Portable Speaker W8LMD User Manual
Mellerware Vacuum Cleaner VAC20002000W User Manual
Metra Electronics Automobile Accessories 99 6510 User Manual
Metrologic Instruments PDAs Smartphones SP5700 Series User Manual