Planet Technology Network Card WL 8310 User Manual

WL-8310 802.11g Wireless PCI Card  
Version 2.1  
Quick Installation Guide  
 
Thank you for purchasing PLANET Wireless PCI Adapter, WL-  
8310. In this installation guide, it illustrates the driver and utility  
installation steps for Windows 98/Me/2000/XP/Server 2003. For  
more information, please also refer to the User’s manual.  
 
Package Content  
WL-8310 x 1  
Dipole antenna x 1  
Quick Installation Guide x 1  
Drivers and User’s Manual CD x 1  
 
Step I: Configuration Utility Installation  
Please install the configuration utility before insert WL-8310 into  
the PCI slot of the computer.  
1. Insert the CD-ROM into the CD-ROM drive to initiate the au-  
torun program. Once completed a menu screen will appear as  
follows.  
 
2. Click on “Configuration Utility” hyper link in WL-8310 field to  
initiate the installation. If the above screen is not shown, you  
can click the “Start” button and choose “Run. When the box  
appears, enter “E:\Utility\WL-8310\setup.exe” (Suppose “E” is  
your CD-ROM drive). You will see the dialog box as the pic-  
ture. Please click “Next” to continue.  
 
3. You can click “Browse” to specify the Destination Folder that  
you want to install the configuration utility. Or you can keep  
the default setting and click ”Next” to continue.  
4. Select the program folder you want to install this utility to. Or  
you can keep the default setting and click ”Next” to continue.  
 
5. Click “Finish” to complete the installation procedures.  
6. Select “Yes” to restart your computer right away, or select  
“No” to restart later.  
 
Step II: Driver Installation  
Win98/Me/2000/XP Driver installation  
The following installation operates under Window  
XP. Procedures will be similar for other Windows  
operating systems.  
Note  
1. Power off the computer. Insert WL-8310 to a vacant PCI slot  
and turn on the computer.  
2. The “Found New Hardware Wizard” screen will appear. Please  
select “Install the software automatically (Recommended)” op-  
tion, and click “Next” to continue.  
 
3. The system will search for the proper driver. Then a dialog  
box will pop up as below. Click “Continue Anyway” to con-  
tinue.  
4. Click “Finish” to complete the installation.  
10  
 
Step III: Configure WL-8310 Wireless  
Settings  
1. After successful installation, the Utility will automatically start.  
You can find the icon  
in the bottom right, please double  
click the icon to make further configuration.  
2. Please select “SiteSurvey” option. Click “Refresh” to find out  
the available Access Points, then you can select one of them  
and click “Connect” to connect it.  
3. After click “Connect, you will see a dialog box appears. It  
is used to create a profile for the Access Point you selected.  
Please click “OK, then WL-8310 will connect to the Access  
Point.  
4. For more information on configuring the wireless card, please  
refer to the user’s manual in provided CD-ROM.  
11  
 
This page is intentionally left blank  
 

Peavey Music Mixer X VCA User Manual
Peerless Industries TV Mount ACC919 User Manual
Petsafe Pet Fence HPK11 11288 User Manual
Philips Car Stereo System 21PT2252 User Manual
Philips Gas Grill 32 9544 User Manual
Philips Stereo Amplifier TDA8946J User Manual
Philips Stereo System FW D5D User Manual
Polycom Life Jacket 1500 1800 2000 4000 User Manual
Poulan Chainsaw 115153026 User Manual
Poulan Snow Blower 421466 User Manual