Silex technology Network Card C 6700WG User Manual

Step 1 : Conꢀgure the Network  
To reset to the factory default settings  
This Setup Guide explains how to conꢀgure C-6700WG  
(this product) to be used in a wireless LAN environment.  
Perform the factory default conꢀguration according to the connection between this product  
and the PC.  
This product has 3 methods of initial conꢀguration as listed below:  
1. Remove the AC plug from the electric outlet.  
- To perform the factory default conꢀguration with a wireless LAN connection, refer to  
- Conꢀguration through a wireless LAN  
- Conꢀguration through a wired LAN  
- Conꢀguration using a USB memory  
Important:  
.
2. Push and hold the button on the print server while re-inserting the AC plug  
into the electric outlet. Continue holding.  
Conꢀgure Through a Wireless LAN  
The print server only needs to be configured on  
one computer.  
- To perform the factory default conꢀguration with a wired LAN connection, refer to  
Conꢀgure Through a Wired LAN.  
Setup Guide  
3. The Status LED(Orange) will light when the factory default conꢀguration  
settings have been restored. Release the push switch.  
This Setup Guide describes how to conꢀgure this product through a  
wireless LAN or wired LAN.  
After setup is complete, go to:  
‘Step 2: Install the Applicationsfor each computer  
that will use the printer.  
If this product has been used in another network, reset it to the factory default settings.  
For details on the factory default conꢀguration, refer to To reset to the factory default settings.  
For other conꢀguration methods, please refer to the users manual.  
5.  
2.  
3.  
4.  
Conꢀgure Through a Wireless LAN  
1.  
The following item is required:  
W A 0 3 7 9 0 X X  
Warranty Booklet  
Contents  
Verify the Wireless LED(Green) blinks.  
Insert the CD-ROM (CX User Software) into your Windows PC.  
Check the message and click OK.  
Install the printer driver on your PC.  
For details, refer to the manual that came with  
your printer.  
Connect the AC adapter to this product and the power  
plug to the outlet.  
C-6700WG  
Power Supply  
Rubber Feet  
Stand  
CX User Software  
Setup Guide  
-USB cable  
(Do not connect the printer to this product yet. Printer  
will be connected in ‘18’)  
(Install the printer driver on your PC and make  
sure you can print with a directly attached USB  
connection from your computer before using  
this product.)  
When the product is placed in the horizontal (side) position, please use the rubber feet provided to prevent the unit from sliding.  
Place one on each corner.  
Use to connect this product and a printer.  
There is no need to purchase a new USB cable when a cable was  
bundled with the printer to be connected to this product.  
For User Registration  
Customer Support  
7.  
8.  
10.  
6.  
9.  
USA : silex technology america, Inc.  
E-mail : [email protected]  
Phone: 801-748-1199  
US Toll Free Phone: 866-765-8761  
Note: A more detailed manual including troubleshooting tips can be found on the CD  
(Insert the CD, and click on Manual when the Autorun menu appears) of this product.  
Read the SOFTWARE LICENSE AGREEMENT and click  
Yes.  
If the screen above is displayed, select the wireless  
network card to be used and click OK.  
CX Wireless Setup screen is displayed.  
Check the notes on the screen and select  
Conꢀgure print server wirelessly from your  
computer and click Next.  
Click Wireless.  
Startup menu is displayed.  
Click Print Server Setup.  
* In a Windows XP (SP2 or higher) or Vista environment, the above message  
will be displayed. Sele. ct Yes  
* The User Account Control screen is displayed when conꢀguration is performed  
on Windows Vista. Select Continue.  
Safety instructions are noted in the Readme ꢀle on the CX User Software . Be sure to read  
them before using this product.  
* This screen is displayed only when two or more  
network cards are installed on your PC.  
Select this product and click Next.  
- Safety instructions regarding the radio waves  
Please note the following instructions:  
- Do not use this product near medical devices such as a heart pacemaker. The radio  
wave generated by this product may interfere with the operation of these devices and  
may threaten one's life.  
11.  
12.  
14.  
13.  
- Do not use this product near microwave ovens. The radio wave used by microwave  
ovens may cause interference to this product.  
Introduction  
If the wireless settings on the PC diꢁer from the  
conꢀguration information on the screen above, change  
the PC wireless settings to match those displayed on  
the screen.  
Select the SSID for your home or oꢂce  
wireless network. If your network is security  
enabled, enter the network key or password  
Select a product to be conꢀgured and click Next.  
Select Get IP Address Automatically  
and click Next.  
* If the wireless network that you wish to use is not shown in  
the list, click Detailed Conꢀg and conꢀgure each setting.  
If the screen above is displayed, you need to change  
the wireless settings on the PC manually.  
Read the message and click OK.  
Collect wireless LAN setting information  
* If your product is not displayed on the list, click Refresh.  
Next.  
and conꢀrm it.  
Click  
Verify the wireless settings on the PC and click Next.  
*
If multiple products are displayed in the list, check the  
* If you use Windows XP or Vista and the setup utility automatically  
changed the wireless settings on the PC, this screen is not displayed.  
Ethernet Address on the label of this product.  
To use this product over the wireless LAN network, you need to conꢀgure wireless LAN  
settings as appropriate for your network. This information needs to be identical to the  
communication devices such as an access point.  
Please refer to your wireless network adapter documentation for  
instructions on how to temporarily change your computer’s wireless  
settings to match those of the print server.  
*
Please collect the following information before the setup.  
Important: When you make this temporary change, your computer will  
no longer be connected to the wireless network or Internet. After you  
have completed the setup for the print server, you will need to change  
your computer’s wireless settings back to their current settings. Please  
make sure you write down the settings for your wireless network before  
you make these changes for the print server configuration.  
Write down your network conꢀguration  
<< If you did not need to change the  
<< If you changed the wireless settings  
on the PC manually in ‘11’, this  
screen will appear  
17.  
18.  
15.  
16.  
wireless settings on the PC manually  
in ‘11’, this screen will appear  
Wireless mode  
Ad hoc (ch. ) / Infrastructure  
>>  
>>  
The initial conꢀguration of  
this product is complete and  
you do not need to conꢀgure  
the print server any more.  
SSID  
After setup is complete on one  
computer, each user that wants  
to use the Canon printer:  
Encryption  
method  
WEP  
/ WPA / WPA2  
Go to  
(Open / Shared)  
Click Finish.  
Select Yes and click Finish.  
To ensure these settings take eꢁect,  
unplug the AC adapter from the electrical  
outlet and then plug it back in.  
Connect the printer to be shared over the network along  
with this product via a USB cable and insert the power  
plug of this product into the outlet.  
Step 2: Install the Applications  
on the next page  
Conꢀrm the conꢀguration parameters and  
click Execute.  
Encryption  
method  
Change the wireless settings on the PC  
(that you have manually changed) back  
to the previous settings written down in  
‘11’.  
* Application install screen will be displayed as  
shown in Step 2 - 3.  
WEP KEY  
or  
Pre-Shared  
Key  
Note: If you manually changed  
the wireless settings at ‘11’  
on your PC, go straight to  
‘3’ in Step 2.  
 

Sharp Flat Panel Television LC 26D5U User Manual
Singer Sewing Machine 114 22 User Manual
Smith Corona Paint Sprayer 1602HD User Manual
Sony Speaker SS F6000 User Manual
Southwing Headphones SH505 User Manual
SOYO Computer Hardware SY 6IZM 3 User Manual
Stanton CD Player S550 User Manual
StarTechcom Universal Remote SV1641HDIE User Manual
Sunbeam Coffeemaker BVMC KG1 User Manual
Sylvania CRT Television RSDCT2703R User Manual