®
3 CD HOME STEREO
AM/FM DUAL CASSETTE RECORDER
WITH REMOTE CONTROL
MODEL SL-6703
OPERATING INSTRUCTIONS
PROGRAMMABLE CD PLAYER WITH REPEAT PLAY
•
FLUORESCENT MULTI-COLOR VFD DISPLAY
INCLUDES MULTI-FUNCTION REMOTE CONTROL
DIGITAL KARAOKE SYSTEM
RECEIVES AM/FM STEREO BROADCASTS
EASY TO OPERATE CONTROLS
•
•
•
•
•
•
•
RECORDS FROM CD, TAPE OR RADIO
DELUXE DYNAMIC SPEAKER SYSTEMS
PLEASE READ CAREFULLY BEFORE USE
IB-SL6703(TA)-PRADO-E-091802
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualified service personnel.
5. Do not connect FM antenna wire to any outdoor antenna.
It is the intent of Lenoxx that this product be used in full compliance with the
copyright laws of the United States and that prior permission be obtained from
copyright owners whenever recording songs from the RADIO or CD’s.
Do not apply oil or petroleum products or solvents to any part of this set.
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated
on the bottom of the set.
2
IB-SL6703(TA)-PRADO-E-091802
CONNECTING THE AC POWER CORD
Insert one end of the supplied AC power cord into the socket located at the back
of the set, and the other end to the wall outlet.
TIP
If the plug of the AC power
cord does not match your
outlet, do not force it.
Reverse it and try again.
AC SOCKET The plugs are polarized
and only fit one way into
the wall outlet and back of
the set.
To a wall outlet
ATTACHING THE SPEAKERS
1.Bring one of the speaker
to the left side of the set.
2.Carefully unwind one
piece of the speaker wire
cord (included), and plug
one red end into the left
plug of Speaker Jack L
(marked “L”), and the black
end into the left Grounding
Jack (marked “G”).
3.Repeat above steps 1 to 2
for the right side speaker.
CONNECTING CD/AUX INPUT
Simply connect the cable’s appropriate end (cable is not included) usually RCA
JACKS to the CD/AUX INPUT of the set and the mini plug to the AUX OUT jack
on your CD player.
YOUR CD PLAYER
OPTIONAL CABLE (3.5mm)
TO RCA JACKS
TO AUX OUT JACK
TO CD/AUX
INPUT JACKS
3
IB-SL6703(TA)-PRADO-E-091802
REMOTE CONTROL
You can control the CD PLAYER with the provided REMOTE CONTROL (including
the functions of POWER ON/OFF, MUTE, CONTINUOUS PLAY, DISC CHANGE,
VOLUME control, CD REPEAT and PLAY features).
NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER,
make sure the POWER switch on the main set is turned on, otherwise,
the REMOTE CONTROL will have no functions to the set.
1
1. POWER ON/OFF
2. MUTE
3. CONTINUOUS PLAY
4. DISC CHANGE
10
2
5. REPEAT - ONE & ALL SONGS
6. VOLUME UP/DOWN
7. SKIP BACKWARD
8. SKIP FORWARD
9. STOP/PROGRAM
10. PLAY/PAUSE
9
3
4
8
NOTE: When you press the POWER
ON/OFF switch to shut the set
off, the VFD display will go out,
and the STANDBY indicator on
the main set will turn on.
5
7
6
Slide the battery cover to remove. Insert 2 size “AAA” batteries correctly so that
the + and - polarities match the polarity diagrams inside the battery compartment.
NOTE:
About half a year of normal operation can be expected when using the
•
alkaline batteries.
when the batteries are exhausted, the remote control will no longer
operate the system. Replace both batteries with new ones.
•
When the remote control is not to be used for a long time (2 months or
more), remove the batteries to avoid possible damage that may be caused
by battery leakage.
•
Avoid keeping the remote control in extremely hot or humid locations.
The remote control’s operating distance is about 0.2m (8 inches) to 6m
(20 feet) away from the remote sensor.
•
•
4
IB-SL6703(TA)-PRADO-E-091802
PLAYING A CD
4
3&5
6
1
2
7
Connect the supplied AC power cord (see page 3).
Press the POWER switch, the VFD
display will turn on.
1
2
Slide the FUNCTION switch to CD position,
the disc tray will be automatically set to DISC
1 position and read the disc on it, “ ” will
show on the VFD display.
Open the CD DOOR by pressing the OPEN/CLOSE
button and place the CD in the NO.1 disc compartment.
The label side of the CD should face upward.
3
Press the DISC CHANGE button to revolve the tray
clockwise. Place other disc(s) on the disk holder(s).
4
5
Close the CD DOOR by pushing the OPEN/
CLOSE button. The corressponding dics
number indicator will be on and the display
will show the corresponding dics number,
such as “
”, “ ” or “
”.
Press the CD PLAY button. The player will play
all the 3 discs continuously, “ ” will show
steadily on the VFD. The corresponding disc
indicator will flash, and the display will show the
track number of current playing.
6
7
You may rotate the TONE control counterclockwise to
intensify bass, and clockwise to intensify the treble.
TIP:
“
” WILL SHOW IN THE DISPLAY IF THERE IS NO DISC IN THE CD
COMPARTMENT OR IF THE DISC IS UPSIDE DOWN.
5
IB-SL6703(TA)-PRADO-E-091802
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
DISC buttons
DISC CHANGE
TIP
When CD play is
paused,
“
”
will
flash and no music
will play.
FUNCTION SWITCH
VOLUME CONTROL
To
Press or Adjust
Adjust the volume
VOLUME control
Stop playback
STOP
To resume play,
press the PAUSE
PLAY/PAUSE
” will flash during pause.
Press again to resume play
after pause.
“
Pause playback
button again,
“
”
will stop flashing
and music will play.
Go to the next track
FORWARDS
BACKWARDS
TIP
Go back to the previous
track
If you bump the set
or the table it is
sitting on, during CD
play, the music will
stop or skip for a few
seconds. This is
normal for this type
of player.
or
Locate a point in a song
Press and hold down while
playing until you find the
point.
Press DISC CHANGE, or
press the DISC button
(DISC 1, DISC 2 or DISC 3)
directly.
Change the discs
TIP
This set has an
electronic volume
control, you may
raise or lower the
volume by pressing
the VOLUME UP and
DOWM buttons.
Cancel 3 discs continuously
playing function.
Press
on the REMOTE.
Press OPEN/CLOSE (press
STOP first).
Remove the CD
To turn off the sound
instantly
Press the MUTE button on
the REMOTE.
Press the POWER switch, the
display will go off.
Turn off the power
6
IB-SL6703(TA)-PRADO-E-091802
REPEAT PLAY
PLAYING CD SONGS (TRACKS) OVER AND OVER
You can play CD tracks over and over in normal or programmed play modes (see
page 8).
REPEAT
POWER SWITCH
FUNCTION SWITCH
1. Press the POWER switch, the display will light up.
2. Set the FUNCTION switch to CD position.
3. Select the track by pressing
or
, and then press
.
4. Press the CD REPEAT button.
To repeat
Display shows
Press
a single track (song)
Press the REPEAT
button once
“REP” will flash.
Press the REPEAT
button twice
“REP” will be
steady on
all the tracks (all songs)
programmed tracks
During programmed play,
press the REPEAT
button twice
“REP” is steady
on
To cancel Repeat Play
Press the REPEAT button until the “REP” goes off.
7
IB-SL6703(TA)-PRADO-E-091802
PROGRAMMED CD PLAY
SELECTING YOUR OWN MUSIC PLAYING ORDER
You can make a program of up to 15 tracks
to play in the order you want them to be
played.
NOTE: Programming is only done during
stop mode.
PROGRAM
During STOP mode, press the
PROGRAM button. “PRG.” will
flash in the display.
1
2
3
Press the SKIP/SEARCH buttons
either
or
until the desired
track shows in the display.
Press the PROGRAM button to
confirm, “PRG.” will flash in the
display.
Repeat steps 2&3 until all the
desired tracks are programmed.
4
5
Press the PLAY button to start
programmed play. “
” , “PRG.”
and the track number being
played will show in the display.
To change the current program
Just create a new program following the programing procedure.
To cancel Program Play
Press the STOP button on the main set or STOP/PROGRAM button on the REMOTE
control twice, “PRG.” will disappear from the display.
8
IB-SL6703(TA)-PRADO-E-091802
LISTENING TO THE RADIO
1
FM MODE
4
2
3
6
Connect the supplied AC power cord (see page 3).
Press the POWER switch, the VFD
display will turn on.
1
2
Set the FUNCTION switch to
RADIO position.
Set the BAND switch to the proper
band position (AM or FM), and set
the FM MODE switch to STEREO
or MONO.
3
4
Tune into the station you prefer
using the TUNING control. Adjust
for the clearest sound.
This indicator will light up when
receiving FM Stereo broadcasts.
5
6
You may rotate the TONE control
counterclockwise to intensify bass,
and clockwise to intensify the treble.
9
IB-SL6703(TA)-PRADO-E-091802
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
FM MODE FUNCTION
VOLUME
TIP
To
Press or Set
If the FM broadcast is
•
noisy, set the FM MODE Adjust the volume
switch from STEREO
to MONO.
VOLUME control (UP or
DOWN).
Set the FUNCTION switch
to TAPE position or press
the POWER switch.
Turn off the Radio
This set has an
electronic
•
volume
control, you may raise
or lower the volume by
pressing the VOLUME
The AM antenna is
magnetic bar within the
system. Change position
of the set for the best AM
reception.
To improve AM broadcast
reception
UP
and
DOWN
buttons.
Unwrap and fully extend
the FM antenna for the
best FM reception.
To improve FM broadcast
reception
FM ANTENNA
Press the MUTE button on
the REMOTE.
To turn off the sound
instantly
10
IB-SL6703(TA)-PRADO-E-091802
PLAYING A TAPE
1
3
4
2
Connect the supplied AC power cord (see page 3).
Press the POWER switch, the VFD
display will turn on.
1
2
FU LL
REEL
EM PTY
REEL
Set the FUNCTION
switch to TAPE position.
A
Press the STOP/EJECT
INSERT THIS WAY
button (DECK
A
or
3
DECK B) to open the
tape compartment and
insert a recorded tape.
Close the door.
STOP/EJECT
Press the PLAY button.
The player turns on and
starts playing.
4
5
PLAY
When the set finishes
playing one side of the
tape, the set will stop. To
hear the other side of the
tape, flip the tape over,
then insert and press
PLAY.
AUTO STOP
11
IB-SL6703(TA)-PRADO-E-091802
RELAY PLAY
1
5
2
4
3
Connect the supplied AC power cord (see page 3).
To play tapes in DECK A and then DECK B, follow the steps below:
Press the POWER switch, the VFD
1
display will turn on.
Set the FUNCTION switch to TAPE
position.
2
Press the cassette PLAY button on
DECK A, DECK A will play.
3
PLAY
Press the cassette PAUSE button on
DECK B.
4
PAUSE
Press the cassette PLAY button on
DECK B. When DECK A finishes playing,
DECK B will start playing automatically.
5
PLAY
When the tape finishes playing on DECK
B, the set will stop.
6
12
IB-SL6703(TA)-PRADO-E-091802
USE THESE BUTTONS FOR ADDITIONAL
CASSETTE TAPE OPERATIONS
VOLUME
CONTROL
PAUSE
PAUSE PLAY
STOP/EJECT
PLAY
RECORD
REWIND & FAST F.
PHONES JACK
STOP/EJECT
REWIND & FAST F.
To
Press or Adjust
Press the VOLUME button ( UP
or DOWN)
Adjust the volume
Stop playback
STOP/EJECT button
FAST FORWARD button or
REWIND button
Fast forward or rewind
the tape
PAUSE button
Press again to resume play after pause.
Pause playback
Eject the cassette
STOP/EJECT button
To enjoy the music
without disturbing others
(headphones are not
included)
Insert your headphone plug into
the PHONES jack
To shut power off
Make sure cassette buttons are all
up (stop) and POWER switch is off.
13
IB-SL6703(TA)-PRADO-E-091802
RECORDING ON A TAPE
1
4
MICROPHONE JACK
3 2
5
Connect the supplied AC power cord (see page 3).
Press the POWER switch, the VFD
display will turn on.
1
2
OK
NO
Press the STOP/EJECT button (DECK
B) to open the tape compartment and
insert a blank tape. Select the program
source (MW, FM, CD, or microphone)
you want to record.
STOP/EJECT
To record from the CD player, set the FUNCTION switch to
CD position, insert a CD and follow the steps to play a CD
(see page 5).
3
To record from a radio, set the FUNCTION switch to RADIO
position, and tune into the station you want (see page 9).
To record from the microphone, set the FUNCTION switch to
the TAPE position, and plug the microphone (not included)
into the MIC JACK. Speak into the microphone.
To record from the DECK A, set the FUNCTION switch to the
TAPE position, and follow the steps to play a TAPE (see
page 11).
Press the RECORD button to start recording. (The PLAY
button is depressed automatically.)
4
5
RECORD
To hear what you recorded, set the FUNCTION switch to
TAPE position, then press REWIND and PLAY.
REWIND PLAY
14
IB-SL6703(TA)-PRADO-E-091802
USE THESE BUTTONS FOR
ADDITIONAL OPERATIONS
TIP
• To
erase
a
DUBBING SPEED
SWITCH
STOP/EJECT
PAUSE
recording, just start
a new recording,
and the old one is
a u t o m a t i c a l l y
replaced.
Press or Set
To
Stop recording
STOP/EJECT button
• see page 19 for
notes on cassettes.
Pause recording
PAUSE button
Press the button again
to resume recording.
Adjust recording speed
when copying tapes
DUBBING SPEED
switch from NORMAL
to HIGH speed.
Turn off the power
Press the STOP/EJECT
button and press the
POWER switch, the VFD
display will go off.
15
IB-SL6703(TA)-PRADO-E-091802
SINGING ALONG WITH KARAOKE FUNCTION
MICROPHONE JACK
VOLUME
2
Connect the supplied AC power cord (see page 3).
Insert microphone plug into the microphone jack.
To avoid mic howling, lower the volume level setting
first.
1
2
NOTE: Microphone is not included, you may
purchase a microphone where you bought
this set.
To sing along with the CD player, set the FUNCTION
switch to CD position, insert a KARAOKE CD disc
and follow the steps to play a CD (see page 5).
To sing along with the tape, set the FUNCTION
switch to the TAPE position, insert a KARAOKE
TAPE into deck A or B, and follow the steps to
play a TAPE (see page 11).
Press the CD PLAY/PAUSE button on the CD player
or press the PLAY button on deck A or B.
3
4
PLAY
Adjust the volume controls (UP or DOWN) to achieve
the best effect.
16
IB-SL6703(TA)-PRADO-E-091802
USE THESE BUTTONS FOR ADDITIONAL
OPERATIONS
TONE
VOLUME
CONTROL
To
Press or Adjust
Adjust the MIC volume
VOLUME control
Adjust the CD or TAPE
music volume
VOLUME control
Rotate the TONE
control
counterclockwise
Intensify bass
Intensify treble
Rotate the TONE
control clockwise
TIP: If there is squealing or howling (feedback) noise during KARAOKE
use, move the microphone away from the speakers or turn down
the volume.
17
IB-SL6703(TA)-PRADO-E-091802
PRECAUTIONS
On Safety
On Operation
As the laser beam used in the CD
If the set is brought directly from a
•
•
player section may be harmful to the
eyes, do not attempt to disassemble
cold to a warm location, or is placed
in a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
set will not operate properly. In
this case, remove the CD and wait
about an hour for the moisture to
evaporate. If the set has not been
used for a long time, set it in the
playback mode to warm it up for a few
minutes before inserting a cassette.
the cabinet.
Refer servicing to
qualified personnel only.
Should any solid object or liquid fall
into the set, unplug the player, and
have it checked by qualified personnel
before operating it any further.
•
On Placement
This set is designed to be played on
•
Do not leave the set in a location
•
a stable no vibration position. If you
bump the set during CD play, the music
will stop or skip for a few seconds.
This is normal for this type of player.
near a heat source, or in a place
subject to direct sunlight, excessive
dust or mechanical shock.
Do not place the set on an inclined
or unstable place.
•
Do not place anything within 1 inch of
•
the back of the cabinet. The
ventilation holes must not be covered
for the set to operate properly and
prolong the life of its components.
If the set is left in a car parked in the
•
sun, be sure to choose a location in
the car where the set will not be
subjected to the direct rays of the
sun.
Since a strong magnet is used for the
•
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the speakers to
prevent possible damage from the
magnets.
18
IB-SL6703(TA)-PRADO-E-091802
PRECAUTIONS (continued)
Notes on CDs
Notes on Cassettes
Break off the cassette recording tabs
Before playing, clean the CD with a
•
•
from side A or B to prevent accidental
recording.
cleaning cloth. Wipe the CD from the
center out.
Side A
Do not use solvents such as benzene,
•
Tab for side A
Tab for side B
thinner, commercially available
cleaners or anti-static spray intended
for vinyl LPs.
Do not expose the CD to direct
•
sunlight or heat sources such as hot
air ducts, nor leave it in a car parked
in direct sunlight as there can be a
considerable rise in temperature inside
the car and result in a damaged CD.
To record on a tape with its tab broken
off, cover the respective tab hole for
side A or B with adhesive tape.
•
Use of a cassette with more than 90
•
minutes, such as C-120 (120
minutes), is not recommended. The
extreme thinness of this tape may
damage this set.
Do not stick paper or stickers on the
CD, nor scratch the CD.
•
After playing, store the CD in its case.
•
To reduce the chances of tape
If there is a scratch, dirt or fingerprints
on the CD, it may cause a tracking
error or skipping.
•
jamming or tangling, you should check
that there are no loose layers of tape
visible through the cassette center
window. If any, tighten these loose
layers of tape using a pencil before
inserting the cassette into the set.
19
IB-SL6703(TA)-PRADO-E-091802
MAINTENANCE
Cleaning the Tape Heads Notes for Storing
Wipe the heads, the pinch roller and
the capstan with a cleaning swab slightly
Cassette Tapes
1. Do not put a tape near a magnetic
moistened with cleaning fluid or alcohol
after every 10 hours of operation for
optimum playback and recording quality.
After cleaning, insert a tape when the
areas cleaned are completely dry.
field, such as a TV, or speaker.
Magnetic fields may reduce the tape
sensitivity or even erase the
recording.
2. Do not store tape for any length of
time in a hot, moist or dusty place.
COTTON SWAB
CAPSTAN
PINCH ROLLER
ERASE HEAD
RECORD/PLAY BACK HEAD
NOTE: In order to see and clean the
head, you may have to press
PLAY first.
Cleaning the Cabinet
Clean the cabinet, panel and controls
with a soft cloth slightly moistened with
water or a mild detergent solution. Do
not use any type of abrasive pad,
scouring powder, or solvent, such as
alcohol or benzene.
20
IB-SL6703(TA)-PRADO-E-091802
TROUBLE SHOOTING
Problem
Remedy
Connect the AC power cord to a wall outlet securely.
The power is not on
•
Make sure the FUNCTION switch is at the right
position as you want.
Adjust the volume.
Unplug the headphones when listening through
speakers.
Check the speaker cord connections.
Press the MUTE button on the REMOTE to make sure
the sound is not muted.
•
•
There is no sound
•
•
•
Press the POWER switch, the VFD display only
lights up when the AC power is ON.
•
VFD display does not light up
“
” appears in the display even
Insert the CD with the label side up.
•
when a CD is in place
Make sure that the CD compartment is closed.
Place the CDs with the label side up.
Clean the CDs.
Take out the CDs and leave the CD DOOR open
for about an hour to dry moisture condensation.
Make sure the FUNCTION switch is at CD position.
•
•
CD does not play
•
•
•
Clean the CDs, or replace it if the CDs are badly
damaged.
Place the player in a location free from vibration.
•
The sound drops out
•
CD does not play while radio
may continue to play
It is normal since the radio uses less power than the
CD player.
•
AM sound is weak or has poor
quality
Change the position of the set for better AM reception.
•
•
Unwrap and stretch out the FM ANTENNA for better
FM reception.
FM is weak
Make sure the safety tab on the cassette is in place
(see page 19).
Make sure the FUNCTION switch is at TAPE position.
•
•
The RECORD button does not
function/The tape does not play
The tape does not erase
completely
Clean the erasing head (see page 20).
•
Make sure the tape is inserted properly.
Make sure the safety tab of the cassette is in place.
•
The tape does not record
•
The sound is weak/The sound
quality is poor
Clean the heads, pinch roller and capstan (see page
20).
•
The tape has reached its end. Remove it, flip it to the
other side and re-insert.
•
Cassette PLAY button pops up
Use only better quality tapes.
Do not use a cassette with more than 90 minutes.
Make sure there are no loose layers of tape visible
before inserting the cassette.
•
Tape jamming or tangling
•
•
21
IB-SL6703(TA)-PRADO-E-091802
SPECIFICATION
General Description
Power source:
AC 120V, 60Hz 28Watts
DC 2 size “AAA” batteries for Remote Control
(Alkaline batteries are recommended)
Speakers (2 ways): 2 - 5” 4 ohm woofers
and 2 - 3” 4 ohm tweeters with crossover
Output power:
Dimensions:
5.0W/channel
Unit
Speaker Box
1
Width: 11”
Depth: 18
Height: 12
Width: 8 / ”
8
15
13
1
Depth: 11 / ”
8
/
”
16
/
13
”
Height: 12
/
”
16
16
Weight: 10LBs
Weight: 3.3LBs
CD Section
Any normal CD used in portable players
760 - 800 NM
Plays disc type:
Laser wavelength:
Tracking method:
Frequency response:
3 - spot error detection
50Hz - 15kHz +1/-2 dB
3.86 mm lens
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).
This set will not play CDRW encoded discs.
Tape Recorder Section
Frequency response: Standard normal bias cassette tape,
70Hz - 10kHz
Radio Section
Frequency range:
FM: 88 - 108 MHz
AM: 530 - 1700 kHz
LENOXX reserves the right to make design and specification changes for
product improvement.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR
LACQUER FINISH.
22
IB-SL6703(TA)-PRADO-E-091802
LIMITED WARRANTY
We warrant this product to be free from defects in material and workmanship
under normal use for a period of 90 days after purchase and we will repair it
free of charge or replace it at no charge, should it become defective under
this warranty, providing you submit proof of purchase (sales slip) with the set.
During the initial 90 day period after original purchase, we will service or
exchange, at no charge, the set that is returned to LENOXX ELECTRONICS
CORP. After the initial 90 day period expires, and for a period of 12 months
from original purchase, we will repair the unit covering any part(s) that need to
be replaced at no charge, but will charge for the cost of labor, return postage
paid by Lenoxx.
This warranty does not apply to any products which have been subject to
misuse, neglect or accident. This warranty does not cover broken cabinet.
UNDER NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. The following charges apply to repairs
beyond the warranty period: $50.00. Be sure to pack carefully and return
postage paid insured together with your money order (personal checks will
not be accepted) and sales receipt to :
LENOXX ELECTRONICS CORP. 2 GERMAK DRIVE, CARTERET N.J. 07008
For customer service
Dial 1-800-315-5885
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
or Visit Our Website: http://www.lenoxx.com
© 2002 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
23
IB-SL6703(TA)-PRADO-E-091802
|